www.JACKHAMMERS.com
Contact Us
Jackhammers.com > Related Accessories > Points, Chisels, and Steel > Paving Breakers 1-1/8" x 6" and 1-1/4" x 6" Chuck
You are viewing Paving Breaker Points, Chisels and Steel Tools:

The following tools are manufactured of high quality carbon steel, forged and properlyheat-treated to provide maximum toughness and edge retention. They are designed to be used for concrete, stone and asphalt cutting applications. They are not designed to cut steel. To minimize unnecessary wear on hammers, be sure to use sharp tools only.
NOTE: Use in Demolition Hammers ONLY! DO NOT use as hand chisels!
Always use safety equipment when working with these tools!

Tool:
Under Collar Length (inches):
Details:

Part Number:

Part Number:

Asphalt Cutter
11"
5" Wide Blade
118-AC
125-AC

Bushing Tool
8"
16 Teeth
118-BT
125-BT

Clay Spade
16"
5-1/2" Wide Blade
118-CS
125-CS

Digging Chisel
16"
3" Wide Blade
118-DC
125-DC

Pin Driver
8"

Socket:

3/8" Deep x 1-3/4" Dia.

118-SD
125-SD

Frost Wedge
17"
2" Wide Blade
118-FW
125-FW

Ground Rod Driver
SOCKET DIAMETER: 11/16"
   
13/16"
118-GRD(B)
1"
118-GRD(C)
125-GRD(C)
1-1/8"
118-GRD(D)
118-GRD(D)

Moil Point
14"
LONGER LENGTHS AVAILABLE
118P-14
125P-14
18"
118P-18
125P-18

Narrow Chisel
14"
LONGER LENGTHS AVAILABLE
118C-14
125C-14
18"
118C-18
125C-18

Wide Chisel
14"
LONGER LENGTHS AVAILABLE
118C3-14
125C3-14
18"
118C3-18
125C3-18

Pipe Driver
11"
PIPE SIZE:
1"
118-PD(A)
125-PD(A)
1-1/4"
118-PD(B)
125-PD(B)
1-1/2"
118-PD(C)
125-PD(C)
2"
118-PD(D)
125-PD(D)

Rock Buster
13"
Taper Range:
1-1/4" to
2-1/4" Dia
118-RB
125-RB

Splitting Wedge
17-1/2"
Drill Hole Size 2 x 12" Deep
118-SW
125-SW

Detachable Shank
7-3/4"

FOR USE WITH:

TAMPER PAD

TENT STAKE DRIVER

SHEATHING DRIVER

118-DS
125-DS

Tamping Pad
6" SQUARE
TPS-6
8" SQUARE
TPS-8
7" ROUND
TPR-7

Tent Steak Driver
2"
TSD-200
2-1/2"
TSD-250

Sheathing Driver
2"
TSH-200
3"
TSH-300