The following tools are manufactured of high quality carbon steel, forged and properlyheat-treated to provide maximum toughness and edge retention. They are designed to be used for concrete, stone and asphalt cutting applications. They are not designed to cut steel. To minimize unnecessary wear on hammers, be sure to use sharp tools only. |
|
NOTE: Use in Demolition Hammers ONLY! DO NOT use as hand chisels! |
|
Always use safety equipment when working with these tools! |
Tool: |
Under Collar Length (inches): |
Details: |
 Part Number: |
 Part Number: |
 Asphalt Cutter |
11" |
5" Wide Blade |
78-AC |
100-AC |
 Bushing Tool |
8" |
16 Teeth |
78-BT |
100-BT |
 Clay Spade |
16" |
5-1/2" Wide Blade |
78-CS |
100-CS |
 Digging Chisel |
16" |
3" Wide Blade |
78-DC |
100-DC |
 Pin Driver |
8" |
Socket: 3/8" Deep x 1-3/4" Dia. |
--- |
100-SD |
 Frost Wedge |
17" |
2" Wide Blade |
--- |
100-FW |
 Ground Rod Driver |
SOCKET DIAMETER: 11/16" |
--- |
100-GRD(A) |
|
13/16" |
--- |
100-GRD(B) |
||
1" |
--- |
100-GRD(C) |
||
1-1/8" |
--- |
100-GRD(D) |
||
 Moil Point |
14" |
LONGER LENGTHS AVAILABLE |
78P-14 |
100P-14 |
18" |
78P-18 |
100P-18 |
||
 Narrow Chisel |
14" |
LONGER LENGTHS AVAILABLE |
78C-14 |
100C-14 |
18" |
78C-18 |
100C-18 |
||
 Wide Chisel |
14" |
LONGER LENGTHS AVAILABLE |
78C3-14 |
100C3-14 |
18" |
78C3-18 |
100C3-18 |
||
 Detachable Shank |
7-3/4" |
FOR USE WITH: TAMPER PAD TENT STEAK DRIVER SHEATHING DRIVER |
78-DS |
100-DS |
 Tamping Pad |
6" SQAURE |
TPS-6
|
||
8" SQUARE |
TPS-8
|
|||
7" ROUND |
TPR-7
|
|||
 Tent Steak Driver |
2" |
TSD-200
|
||
2-1/2" |
TSD-250
|
|||
 Sheathing Driver |
2" |
TSH-200
|
||
3" |
TSH-300
|
|||
