www.JACKHAMMERS.com
Contact Us

Jackhammers.com > Tools > Pneumatic > Paving Breakers > IR PB Series
Ingersoll Rand

Model: "PB Series"

Pneumatic Paving Breaker

Proven reliability and productivity makes the PB35 units a favorite for bridge deck resurfacing and lightweight demolition of concrete and asphalt while the PB50 units are a favorite for general demolition

  • One piece housing eliminates costly side rods and springs
  • Power -stroke piston delivers more energy to the work surface and eliminates another costly wear item, the anvil block
  • Built in lubricator helps assure adequate lubrication
  • Two roll pins and removal of the housing plug on the top head make service access simple

 

Your BEST price is just a call away!
800-241-9669

Why don't we show prices?

Model
Chuck / Shank Size (inches)
Part Number
PB35AL8
1" x 4-1/4"
PB35AL8

PB35AS8
(Muffler)

1" x 4-1/4"
PB35AS8
PB50AL1
1-1/8" x 6"
PB50AL1

PB50AS1
(Muffler)

1-1/8" x 6"
PB50AS1
  • Technical Specs
  • Accessory Tools
  • Related Accessories
  • Safety Gear
  • Tool Pictures
  • Parts
Model

Handle
Type

Muffler Hex Shank Size Weight w/o Accessory lbs (kg) Stroke Length in. (mm) Bore Diameter in. (mm) Blows per Minute Length w/o Accessory in. (mm) Air Inlet NPT in. Min Hose Size in. (mm) Air Consumption @ Load cfm (L/min)
PB35AL8 Standard No 1" x 4-1/4" 40 (18) 6.25 (159) 1.75 (44) 1,250 25 (625) 3/4 3/4 (19) 49 (1388)
PB35AS8 Standard Yes 1" x 4-1/4" 43 (20) 6.25 (159) 1.75 (44) 1,250 25 (625) 3/4 3/4 (19) 49 (1388)
PB50AL1 Standard No 1-1/8" x 6" 52 (24) 6.25 (159) 1.75 (44) 1,150 27.5 (699) 3/4 3/4 (19) 58 (1643)
PB50AS1 Standard Yes 1-1/8" x 6" 55 (25) 6.25 (159) 1.75 (44) 1,150 27.5 (699) 3/4 3/4 (19) 58 (1,643)
Tool:
Under Collar Length (inches):
Details:

Part Number:

Asphalt Cutter
11"
5" Wide Blade
100-AC

Bushing Tool
8"
16 Teeth
100-BT

Clay Spade
16"
5-1/2" Wide Blade
100-CS

Digging Chisel
16"
3" Wide Blade
100-DC

Pin Driver
8"

Socket:

3/8" Deep x 1-3/4" Dia.

100-SD

Frost Wedge
17"
2" Wide Blade
100-FW

Ground Rod Driver
SOCKET DIAMETER: 11/16"
100-GRD(A)
13/16"
100-GRD(B)
1"
100-GRD(C)
1-1/8"
100-GRD(D)

Moil Point
14"
LONGER LENGTHS AVAILABLE
100P-14
18"
100P-18

Narrow Chisel
14"
LONGER LENGTHS AVAILABLE
100C-14
18"
100C-18

Wide Chisel
14"
LONGER LENGTHS AVAILABLE
100C3-14
18"
100C3-18

Detachable Shank
7-3/4"

FOR USE WITH:

TAMPER PAD

TENT STAKE DRIVER

SHEATHING DRIVER

100-DS

Tamping Pad
6" SQUARE
TPS-6
8" SQUARE
TPS-8
7" ROUND
TPR-7

Tent Stake Driver
2"
TSD-200
2-1/2"
TSD-250

Sheathing Driver
2"
TSH-200
3"
TSH-300

 

Tool:
Under Collar Length (inches):
Details:

Part Number:

Asphalt Cutter
11"
5" Wide Blade
118-AC

Bushing Tool
8"
16 Teeth
118-BT

Clay Spade
16"
5-1/2" Wide Blade
118-CS

Digging Chisel
16"
3" Wide Blade
118-DC

Pin Driver
8"

Socket:

3/8" Deep x 1-3/4" Dia.

118-SD

Frost Wedge
17"
2" Wide Blade
118-FW

Ground Rod Driver
SOCKET DIAMETER: 11/16"
 
13/16"
118-GRD(B)
1"
118-GRD(C)
1-1/8"
118-GRD(D)

Moil Point
14"
LONGER LENGTHS AVAILABLE
118P-14
18"
118P-18

Narrow Chisel
14"
LONGER LENGTHS AVAILABLE
118C-14
18"
118C-18

Wide Chisel
14"
LONGER LENGTHS AVAILABLE
118C3-14
18"
118C3-18

Pipe Driver
11"
PIPE SIZE:
1"
118-PD(A)
1-1/4"
118-PD(B)
1-1/2"
118-PD(C)
2"
118-PD(D)

Rock Buster
13"
Taper Range:
1-1/4" to
2-1/4" Dia
118-RB

Splitting Wedge
17-1/2"
Drill Hole Size 2 x 12" Deep
118-SW

Detachable Shank
7-3/4"

FOR USE WITH:

TAMPER PAD

TENT STAKE DRIVER

SHEATHING DRIVER

118-DS

Tamping Pad
6" SQUARE
TPS-6
8" SQUARE
TPS-8
7" ROUND
TPR-7

Tent Stake Driver
2"
TSD-200
2-1/2"
TSD-250

Sheathing Driver
2"
TSH-200
3"
TSH-300

 

Coming Soon!
There Are No Additional Pictures Available For This Tool.