Contact Us

Jackhammers.com > Tools > Pneumatic > Post Driver > Rhino PD-39P

Model: "PD-39P"

Pneumatic Post Driver

The PD-39P Panel Post Driver ensures fast erection of temporary panel fencing. Because the PD-39P is so light in weight, the operator must pull down on the spring loaded handles to provide the correct weight for driving.


Model and/or
Part Number
Light Weight Medium Duty Panel Post Driver with a 2-1/8" (53.98 mm) I.D. Chuck, uses 42 CFM (1.19 m3/min) @ 90 psi (6.4 kg/cm2). Approx. Wt. 41 lbs (18.6 kg)

Note: If the post you intend to drive is tubular in construction and the inside dimension is larger than 2.5", you will need to use a drive cap. Please call us for assistance in determining your needs.

Your BEST price is just a call away!

Why don't we show prices?

  • Technical Specs
  • Related Accessories
  • Safety Gear
  • Tool Pictures
  • Parts

Rhino PD-39P Brochure

Rhino PD-39P Fast Facts


Top Cover: Alloy steel, treated to remove all mill scale, O-Ring sealed.
Body: Ductile iron casting, with excellent wear resistant characteristics. 90 air inlet cast into the body.
Piston: Alloy steel heat treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running.
Master Chuck: The 2 1/8" (53.98 mm) I.D. master chuck is of an all welded, reinforced steel and tubing construction. The chuck is equipped with extra long mounting bolt tubes. The handle mounts with three keys, each to insure maximum life, are placed on one side of the chuck to allow the post driver to be easily operated from one side of a panel fence.
Handles: 30 7/8" long, zinc plated handles constructed of steel tubing, with three keyways for maximum life and four springs to help isolate the operator from vibration. HI Tech pre-lubed bushings help to add long life to the handles.
Throttle Valve: Each unit includes a Rhino Stainless Steel Throttle Valve.The valve is equipped with a lever lock for safety.
Fasteners: S.A.E.Grade 5 bolts with belleville lock washers. All fasteners are plated.
Air Consumption: 42 CFM (1.19 m3/min) @ 90 PSI (6.4 kg/cm2)