- Part Number
- 2270-H
- Stroke
- 2″
- Blows/min
- 2,100 [35/sec]
- Weight
- 17 lb
- Air use
- 32–34 CFM
- Overall length
- 12¾″
Airrex®
Airrex Viper Z 3″ Chipping Hammer — Ball Retainer
.580″ Hex or .680″ Round
Viper Z-Series Part Numbers
Airrex Viper Z-Series Chipping Hammer
Viper Z-2 Hex2" Stroke x 0.580 HexPart No. 2270-H
Viper Z-3 Hex3" Stroke x 0.580 HexPart No. 3372-H
Viper Z-4 Hex4" Stroke x 0.580 HexPart No. 4474-H
Viper Z-2 Round2" Stroke x 0.680 RoundPart No. 2269-R
Viper Z-3 Round3" Stroke x 0.680 RoundPart No. 3371-R
Viper Z-4 Round4" Stroke x 0.680 RoundPart No. 4473-R
Overview
The Airrex Viper “Z” Outside Trigger Pneumatic Chipping Hammers are a four-bolt construction and are offered in 2-, 3- and 4-inch strokes. This tool is designed for Ramp and Bridge Deck work, Foundry work and Light Demolition, Pin Driving and more. Choose .580 Hex or .680 Round shank.
Features & Applications
- Four-bolt chipping-hammer construction.
- 2-inch stroke: 17 lb and 2,100 blows per minute.
- 3-inch stroke: 18 lb and 1,650 blows per minute.
- 4-inch stroke: 19 lb and 1,375 blows per minute.
- Air Consumption: from 32-36 cfm at 90 psi.
- Choose .580 Hex or .680 Round shank.
Choose Your Chuck:
Viper Z-Series Part Numbers
Airrex Viper Z-Series Chipping Hammer
Viper Z-2 · 2″ stroke · Part No. 2270-H .580″ Hex × Round Collar
Viper Z-3 · 3″ stroke · Part No. 3372-H .580″ Hex × Round Collar
Viper Z-4 · 4″ stroke · Part No. 4474-H .580″ Hex × Round Collar
These references identify the models for the selected chuck. Compare the configurations below, and confirm the model, chuck and retainer when requesting a quote.
Step 1
Select Chuck Size:
You Selected.580″ Hex × Round Collar
Ready to Order? Call NowStep 2
Select Stroke:
| Select Your Hammer | |||
|---|---|---|---|
| Part Number | 2270-H | 3372-H | 4474-H |
| Stroke | 2″ | 3″ | 4″ |
| Blows per minute | 2,100 [35/sec] | 1,650 [27/sec] | 1,375 [23/sec] |
| Weight | 17 lb | 18 lb | 19 lb |
| Air consumption | 32–34 CFM | 33–35 CFM | 34–36 CFM |
| Overall length | 12¾″ | 14 9/16″ | 15 9/16″ |
| Bore | 1⅛″ | 1⅛″ | 1⅛″ |
| Air pressure | 90 PSI | 90 PSI | 90 PSI |
| Chuck | .580″ Hex | .580″ Hex | .580″ Hex |
- Part Number
- 3372-H
- Stroke
- 3″
- Blows/min
- 1,650 [27/sec]
- Weight
- 18 lb
- Air use
- 33–35 CFM
- Overall length
- 14 9/16″
- Part Number
- 4474-H
- Stroke
- 4″
- Blows/min
- 1,375 [23/sec]
- Weight
- 19 lb
- Air use
- 34–36 CFM
- Overall length
- 15 9/16″
All three models
.580″ Hex × Round Collar
1⅛″ bore • 90 PSI
You Selected
Viper Z-3 (Hex)Part # 3372-H.580″ Hex × Round CollarQuick Change Ball Retainer
Your Quote
0 items · 0 pieces
Add a hammer or accessory to get started.
Step 3
Select Points, Chisels, Etc
The following Points, Chisels, etc. are used with Quick Change Ball Retainers.
.580″ Hex × Round Collar
Looking for the Solid Retainer version?Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
Moil Point
Standard Lengths: 12″ / 18″ / 24″
.580″ Hex × Round Collar
Length Under CollarQuantity
9″
12″RCHS-12P
18″RCHS-18P
24″RCHS-24P
Request Longer Lengths
Narrow Chisel
Standard Lengths: 9″ / 12″ / 18″ / 24″
.580″ Hex × Round Collar
Length Under CollarQuantity
9″RCHS-9C
12″RCHS-12C
18″RCHS-18C
24″RCHS-24C
Request Longer Lengths
2″ Wide Blade Chisel
Standard Lengths: 12″ / 18″ / 24″
.580″ Hex × Round Collar
Length Under CollarQuantity
12″RCHS-12C2
18″RCHS-18C2
24″RCHS-24C2
Request Longer Lengths
3″ Wide Blade Chisel
Standard Lengths: 12″ / 18″ / 24″
.580″ Hex × Round Collar
Length Under CollarQuantity
12″RCHS-12C3
18″RCHS-18C3
24″RCHS-24C3
Request Longer Lengths
4½″ Clay Spade
Standard Lengths: 10″
.580″ Hex × Round Collar
Length Under CollarQuantity
10″RCHS-CS
All-Steel Bushing Tool
Standard Lengths: 8″
.580″ Hex × Round Collar
Length Under CollarQuantity
8″RCHS-BT
Pin Driver
.580″ Hex × Round Collar
Request the Size You Need.
Tell us your Pin Diameter, Length, and Chuck Configuration.
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
