- Part Number
- 5540-H
- Stroke
- 3″
- Blows/min
- 1,650
- Weight
- 18 lb
- Air use
- 33–35 CFM
- Overall length
- 14 9/16″
Airrex®
Airrex Viper ZE-Series Chipping Hammer — Ball Retainer
.580″ Hex or .680″ Round
Viper ZE-Series Part Numbers
Airrex Viper ZE-Series Chipping Hammer
Viper ZE-3 Hex3" Stroke x 0.580 HexPart No. 5540-H
Viper ZE-3 Round3" Stroke x 0.680 RoundPart No. 5541-R
Overview
Overview
Airrex Viper “ZE” Outside Trigger, Pneumatic Chipping Hammers are four-bolt construction and are offered in 3” Strokes. This tool is designed for Ramp and Bridge Deck work, Foundry work and Light Demolition, Pin Driving and more. Choose .580 Hex or .680 Round shank.
Features & Applications
- 3-inch piston stroke.
- 18 lb weight and 14-9/16-inch overall length.
- Air Consumption: 33–35 cfm at 90 psi.
- Part 5540-H has a .580 Hex chuck.
- Part 5541-R has a .680 Round chuck.
Choose Your Chuck:
Viper ZE-Series Part Numbers
Airrex Viper ZE-Series Chipping Hammer
Viper ZE-3 · 3″ stroke · Part No. 5540-H .580″ Hex × Round Collar
These references identify the models for the selected chuck. Compare the configurations below, and confirm the model, chuck and retainer when requesting a quote.
Step 1
Select Chuck Size:
You Selected.580″ Hex × Round Collar
Ready to Order? Call NowStep 2
Select Stroke:
| Select Your Hammer | |
|---|---|
| Part Number | 5540-H |
| Stroke | 3″ |
| Blows per minute | 1,650 |
| Weight | 18 lb |
| Air consumption | 33–35 CFM |
| Overall length | 14 9/16″ |
| Bore | 1⅛″ |
| Air pressure | 90 PSI |
| Chuck | .580″ Hex |
3″ stroke model
.580″ Hex × Round Collar
1⅛″ bore • 90 PSI
You Selected
Viper ZE-3 (Hex)Part # 5540-H.580″ Hex × Round CollarQuick Change Ball Retainer
Your Quote
0 items · 0 pieces
Add a hammer or accessory to get started.
Step 3
Select Points, Chisels, Etc
The following Points, Chisels, etc. are used with Quick Change Ball Retainers.
.580″ Hex × Round Collar
Looking for the Solid Retainer version?Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
Moil Point
Standard Lengths: 12″ / 18″ / 24″
.580″ Hex × Round Collar
Length Under CollarQuantity
9″
12″RCHS-12P
18″RCHS-18P
24″RCHS-24P
Request Longer Lengths
Narrow Chisel
Standard Lengths: 9″ / 12″ / 18″ / 24″
.580″ Hex × Round Collar
Length Under CollarQuantity
9″RCHS-9C
12″RCHS-12C
18″RCHS-18C
24″RCHS-24C
Request Longer Lengths
2″ Wide Blade Chisel
Standard Lengths: 12″ / 18″ / 24″
.580″ Hex × Round Collar
Length Under CollarQuantity
12″RCHS-12C2
18″RCHS-18C2
24″RCHS-24C2
Request Longer Lengths
3″ Wide Blade Chisel
Standard Lengths: 12″ / 18″ / 24″
.580″ Hex × Round Collar
Length Under CollarQuantity
12″RCHS-12C3
18″RCHS-18C3
24″RCHS-24C3
Request Longer Lengths
4½″ Clay Spade
Standard Lengths: 10″
.580″ Hex × Round Collar
Length Under CollarQuantity
10″RCHS-CS
All-Steel Bushing Tool
Standard Lengths: 8″
.580″ Hex × Round Collar
Length Under CollarQuantity
8″RCHS-BT
Pin Driver
.580″ Hex × Round Collar
Request the Size You Need.
Tell us your Pin Diameter, Length, and Chuck Configuration.
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
