- Part Number
- 2292-H
- Stroke
- 2″
- Blows/min
- 2,100 [35/sec]
- Weight
- 17 lb
- Air use
- 32–34 CFM
- Overall length
- 12¾″
Airrex®
Airrex Viper ZT-Series Chipping Hammer — Ball Retainer
.580″ Hex or .680″ Round
Viper ZT-Series Part Numbers
Airrex Viper ZT-Series Chipping Hammer
Viper ZT-2 Hex2" Stroke x 0.580 HexPart No. 2292-H
Viper ZT-3 Hex3" Stroke x 0.580 HexPart No. 3392-H
Viper ZT-4 Hex4" Stroke x 0.580 HexPart No. 4492-H
Viper ZT-2 Round2" Stroke x 0.680 RoundPart No. 2291-R
Viper ZT-3 Round3" Stroke x 0.680 RoundPart No. 3391-R
Viper ZT-4 Round4" Stroke x 0.680 RoundPart No. 4491-R
Overview
The Airrex Viper “ZT” Pneumatic Chipping Hammer is also a Premium Grade Hammer. It is an Inside Trigger, four Bolt Hammer. It is identical to the ZP Series except it has an Inside Trigger.
Like the Viper ZP it is frequently used in Ramp and Bridge Deck work, Foundry work, Light Demolition, Pin Driving and much more. It is capable of all day use.
The range offers 2-, 3- and 4-inch strokes and either a .580 Hex or .680 Round chuck. This gives you a choice of tool length, weight and tooling connection within the ZT series.
Features & Applications
- Inside-trigger design.
- 2-inch models: 17 lb and 2,100 blows per minute.
- 3-inch models: 18 lb and 1,650 blows per minute.
- 4-inch models: 19 lb and 1,375 blows per minute.
- Air Consumption: 32–34 to 34–36 cfm at 90 psi.
- Hex and round versions require matching shank, collar and retainer.
Choose Your Chuck:
Viper ZT-Series Part Numbers
Airrex Viper ZT-Series Chipping Hammer
Viper ZT-2 · 2″ stroke · Part No. 2292-H .580″ Hex × Round Collar
Viper ZT-3 · 3″ stroke · Part No. 3392-H .580″ Hex × Round Collar
Viper ZT-4 · 4″ stroke · Part No. 4492-H .580″ Hex × Round Collar
These references identify the models for the selected chuck. Compare the configurations below, and confirm the model, chuck and retainer when requesting a quote.
Step 1
Select Chuck Size:
You Selected.580″ Hex × Round Collar
Ready to Order? Call NowStep 2
Select Stroke:
| Select Your Hammer | |||
|---|---|---|---|
| Part Number | 2292-H | 3392-H | 4492-H |
| Stroke | 2″ | 3″ | 4″ |
| Blows per minute | 2,100 [35/sec] | 1,650 [27/sec] | 1,375 [23/sec] |
| Weight | 17 lb | 18 lb | 19 lb |
| Air consumption | 32–34 CFM | 33–35 CFM | 34–36 CFM |
| Overall length | 12¾″ | 14 9/16″ | 15 9/16″ |
| Bore | 1⅛″ | 1⅛″ | 1⅛″ |
| Air pressure | 90 PSI | 90 PSI | 90 PSI |
| Chuck | .580″ Hex | .580″ Hex | .580″ Hex |
- Part Number
- 3392-H
- Stroke
- 3″
- Blows/min
- 1,650 [27/sec]
- Weight
- 18 lb
- Air use
- 33–35 CFM
- Overall length
- 14 9/16″
- Part Number
- 4492-H
- Stroke
- 4″
- Blows/min
- 1,375 [23/sec]
- Weight
- 19 lb
- Air use
- 34–36 CFM
- Overall length
- 15 9/16″
All three models
.580″ Hex × Round Collar
1⅛″ bore • 90 PSI
You Selected
Viper ZT-3 (Hex)Part # 3392-H.580″ Hex × Round CollarQuick Change Ball Retainer
Your Quote
0 items · 0 pieces
Add a hammer or accessory to get started.
Step 3
Select Points, Chisels, Etc
The following Points, Chisels, etc. are used with Quick Change Ball Retainers.
.580″ Hex × Round Collar
Looking for the Solid Retainer version?Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
Moil Point
Standard Lengths: 12″ / 18″ / 24″
.580″ Hex × Round Collar
Length Under CollarQuantity
9″
12″RCHS-12P
18″RCHS-18P
24″RCHS-24P
Request Longer Lengths
Narrow Chisel
Standard Lengths: 9″ / 12″ / 18″ / 24″
.580″ Hex × Round Collar
Length Under CollarQuantity
9″RCHS-9C
12″RCHS-12C
18″RCHS-18C
24″RCHS-24C
Request Longer Lengths
2″ Wide Blade Chisel
Standard Lengths: 12″ / 18″ / 24″
.580″ Hex × Round Collar
Length Under CollarQuantity
12″RCHS-12C2
18″RCHS-18C2
24″RCHS-24C2
Request Longer Lengths
3″ Wide Blade Chisel
Standard Lengths: 12″ / 18″ / 24″
.580″ Hex × Round Collar
Length Under CollarQuantity
12″RCHS-12C3
18″RCHS-18C3
24″RCHS-24C3
Request Longer Lengths
4½″ Clay Spade
Standard Lengths: 10″
.580″ Hex × Round Collar
Length Under CollarQuantity
10″RCHS-CS
All-Steel Bushing Tool
Standard Lengths: 8″
.580″ Hex × Round Collar
Length Under CollarQuantity
8″RCHS-BT
Pin Driver
.580″ Hex × Round Collar
Request the Size You Need.
Tell us your Pin Diameter, Length, and Chuck Configuration.
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
