E-Z Drill
E-Z Drill 110B Pneumatic Concrete Dowel Drill
Overview
The E-Z Drill 110B is a single-gang Pneumatic Concrete Dowel Drill that works from the subgrade. Its guide wheels follow the slab face during drilling and reposition for transport, helping crews move between holes without changing platforms.
Features & Applications
- 5/8–2-inch hole diameters; standard drilling depth up to 12 inches.
- CP 22 drill motor with roller-bearing carriage feed.
- 50 CFM minimum air demand; 90 PSI operating pressure at the drill motor.
- Optional hole-spacing guide and vertical-conversion kit.
- Compare models
- Need more depth? Compare the 210B for holes up to 18 inches deep. For holes no deeper than 9 inches and a smaller opening, compare the 85B. Check each model’s dust-collection configuration before choosing.
- Request a quote
- Request a quote with your hole diameter, depth, patch opening, compressor capacity and drilling direction.
Your BEST price is just a call away.
Adds the complete tool shown above—not an individual replacement part. Add more tools to build one quote request, then review your quote list.
1-800-241-9669
Need help with a model or part? Talk to Mining Auger & Tool Works.
110B Part Number
E-Z Drill 110B Drill Rig
110B
Step 1
Select Your Tool:
Select the Model and Part Number You Need.
| Select Your Tool | |
|---|---|
| Weight | 170 lb |
| Drilling Depth (Standard) | 12 inches |
| Drill Bit Diameter | 5/8–2 inches |
| Pneumatic Drill Motor | CP 22 |
| Drill Motor Weight | 28 lb |
| Chuck Size | 7/8 × 3-1/4 inches |
| Minimum Air Supply | 50 CFM |
| Air Pressure | 90 PSI |
| Impact Energy | 24 ft-lb per blow |
| Blows per Minute | 2,600 |
| Rotation Speed | 210 RPM |
Original Specification Chart and Dimensions
Technical Specs
More Drill Rigs
View all →
