Jackhammers.com > Tools > Pneumatic > Breakers > CP 1210
Chicago Pneumatic
Model: "CP 1210"
Pneumatic Breaker
l
This tool is lightweight, fast and very hard hitting. It is most often used on jobs where weight restrictions are in place such as ramps, bridge decks and some highway jobs. Model 1210S is equipped with a muffler. Model 1210SVR is equipped with muffler and vibration reduction handles.
Your BEST price is just a call away!
800-241-9669
Model |
Chuck / Shank Size (inches) |
Part Number |
1210 |
1" x 4-1/4" |
8900003001 |
Model |
Chuck / Shank Size (inches) |
Part Number |
1210S |
1" x 4-1/4" |
8900003003 |
1210S |
1-1/4" x 6" |
8900003009 |
1210S |
1-1/8" x 6" |
8900003007 |
Model |
Chuck / Shank Size (inches) |
Part Number |
1210SVR |
1" x 4-1/4" |
8900003005 |
1210SVR |
1-1/4" x 6" |
8900003010 |
1210SVR |
1-1/8" x 6" |
8900003008 |
- Technical Specs
- Accessory Tools
- Related Accessories
- Safety Gear
- Tool Pictures
- Parts
| Part Number | Description | Weight | Length | Air consumption | Blows per minute | Vibration level 3 axes (ISO 20643) | Chuck size |
| lb | inch | cfm | m/sec² | inch | |||
| 8900 0030 01 | CP 1210 1 | 44,0 | 21 | 56,15 | 1400 | 1 x 4-1/4 | |
| 8900 0030 03 | CP 1210 S 1 | 48,0 | 21 | 56,15 | 1400 | 14,6 | 1 x 4-1/4 |
| 8900 0030 09 | CP 1210 S 1 1/4 | 50,0 | 23 | 56,15 | 1400 | 14,6 | 1-1/4 x 6 |
| 8900 0030 07 | CP 1210 S 1 1/8 | 50,0 | 23 | 56,15 | 1400 | 14,6 | 1-1/8 x 6 |
| 8900 0030 05 | CP 1210 SVR 1 | 54,0 | 24 | 56,15 | 1400 | 5,3 | 1 x 4-1/4 |
| 8900 0030 10 | CP 1210 SVR 1 1/4 | 55,0 | 26 | 56,15 | 1400 | 5,3 | 1-1/4 x 6 |
| 8900 0030 08 | CP 1210 SVR 1 1/8 | 56,2 | 26 | 56,5 | 1400 | 5,3 | 1-1/8 x 6 |
Tool: |
Under Collar Length (inches): |
Details: |
 Part Number: |
 Part Number: |
 Asphalt Cutter |
11" |
5" Wide Blade |
118-AC |
125-AC |
 Bushing Tool |
8" |
16 Teeth |
118-BT |
125-BT |
 Clay Spade |
16" |
5-1/2" Wide Blade |
118-CS |
125-CS |
 Digging Chisel |
16" |
3" Wide Blade |
118-DC |
125-DC |
 Pin Driver |
8" |
Socket: 3/8" Deep x 1-3/4" Dia. |
118-SD |
125-SD |
 Frost Wedge |
17" |
2" Wide Blade |
118-FW |
125-FW |
 Ground Rod Driver |
SOCKET DIAMETER: 11/16" |
|||
13/16" |
118-GRD(B) |
|||
1" |
118-GRD(C) |
125-GRD(C) |
||
1-1/8" |
118-GRD(D) |
118-GRD(D) |
||
 Moil Point |
14" |
LONGER LENGTHS AVAILABLE |
118P-14 |
125P-14 |
18" |
118P-18 |
125P-18 |
||
 Narrow Chisel |
14" |
LONGER LENGTHS AVAILABLE |
118C-14 |
125C-14 |
18" |
118C-18 |
125C-18 |
||
 Wide Chisel |
14" |
LONGER LENGTHS AVAILABLE |
118C3-14 |
125C3-14 |
18" |
118C3-18 |
125C3-18 |
||
 Pipe Driver |
11" |
PIPE SIZE: 1" |
118-PD(A) |
125-PD(A) |
1-1/4" |
118-PD(B) |
125-PD(B) |
||
1-1/2" |
118-PD(C) |
125-PD(C) |
||
2" |
118-PD(D) |
125-PD(D) |
||
 Rock Buster |
13" |
Taper Range: 1-1/4" to 2-1/4" Dia |
118-RB |
125-RB |
 Splitting Wedge |
17-1/2" |
Drill Hole Size 2 x 12" Deep |
118-SW |
125-SW |
 Detachable Shank |
7-3/4" |
FOR USE WITH: TAMPER PAD TENT STAKE DRIVER SHEATHING DRIVER |
118-DS |
125-DS |
 Tamping Pad |
6" SQUARE |
TPS-6
|
||
8" SQUARE |
TPS-8
|
|||
7" ROUND |
TPR-7
|
|||
 Tent Stake Driver |
2" |
TSD-200
|
||
2-1/2" |
TSD-250
|
|||
 Sheathing Driver |
2" |
TSH-200
|
||
3" |
TSH-300
|
|||
Tool: |
Under Collar Length (inches): |
Details: |
 Part Number: |
Asphalt Cutter |
11" |
5" Wide Blade |
100-AC |
Bushing Tool |
8" |
16 Teeth |
100-BT |
Clay Spade |
16" |
5-1/2" Wide Blade |
100-CS |
Digging Chisel |
16" |
3" Wide Blade |
100-DC |
Pin Driver |
8" |
Socket: 3/8" Deep x 1-3/4" Dia. |
100-SD |
Frost Wedge |
17" |
2" Wide Blade |
100-FW |
Ground Rod Driver |
SOCKET DIAMETER: 11/16" |
100-GRD(A) |
|
13/16" |
100-GRD(B) |
||
1" |
100-GRD(C) |
||
1-1/8" |
100-GRD(D) |
||
Moil Point |
14" |
LONGER LENGTHS AVAILABLE |
100P-14 |
18" |
100P-18 |
||
Narrow Chisel |
14" |
LONGER LENGTHS AVAILABLE |
100C-14 |
18" |
100C-18 |
||
Wide Chisel |
14" |
LONGER LENGTHS AVAILABLE |
100C3-14 |
18" |
100C3-18 |
||
Detachable Shank |
7-3/4" |
FOR USE WITH: TAMPER PAD TENT STAKE DRIVER SHEATHING DRIVER |
100-DS |
Tamping Pad |
6" SQUARE |
TPS-6 |
|
8" SQUARE |
TPS-8 |
||
7" ROUND |
TPR-7 |
||
Tent Stake Driver |
2" |
TSD-200 |
|
2-1/2" |
TSD-250 |
||
Sheathing Driver |
2" |
TSH-200 |
|
3" |
TSH-300 |
Chicago Pneumatic 1210 Series Safe Operation Manual
