Rhino PD-55 · 1" (25.4 mm) I.D. Chuck Adapter
Rhino PD-55 chuck adapters
Original diagram item6
Description1" (25.4 mm) I.D. Chuck Adapter
Part # 070614
Rhino
Rhino PD-55 Pneumatic Post Driver
Overview
The Rhino PD-55 Pneumatic Post Driver installs compatible fence posts, T-posts, ground rods, tent stakes, delineator posts and form pins. Its compact layout is designed for one operator. Interchangeable chucks and bolt-on adapters fit different post shapes and sizes.
Features & Applications
- Alloy-steel double-valve reciprocating piston.
- Published air consumption: 42 CFM at 90 psi.
- Standard master chuck: 3-7/8-inch inside diameter.
- Adapters and any required driving caps are selected for the exact post.
- Bolt-on adapters are sold separately.
Complete tool: PD-55Tool part # 70013
Medium Duty Post Driver 3-7/8" I.D. Master Chuck
Your BEST price is just a call away.
Adds the complete tool shown above—not an individual replacement part. Add more tools to build one quote request, then review your quote list.
1-800-241-9669
Need help with a model or part? Talk to Mining Auger & Tool Works.
PD-55 Part Number
Rhino PD-55 Post Driver
PD-55Medium Duty Post Driver 3-7/8" I.D. Master ChuckPart No. 70013
Step 1
Select Your Tool:
Select the Model and Part Number You Need.
| Select Your Tool | |
|---|---|
| Part Number | 70013 |
| Item | Description |
| Top Cover: | Ductile iron casting, high in strength and ductility has a 1" (25.4 mm) diameter handle designed into the cover for easy handling and carrying. O-Ring sealed. |
| Body: | Ductile iron casting, with excellent wear resistant characteristics. The air inlet is cast into the body and tapped with 3/4" NPT female threaded ports, along with 1" (25.4 mm) diameter ergonomically designed side handles for easy handling and carrying. Chuck bolts pass thru the lower body flange into tapped holes in the chuck mounting plate allowing special chucks to be made in a wide variety of shapes and sizes. |
| Piston: | Alloy steel heat-treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running. |
| Master Chuck and Chuck Adapters: | The 3-7/8" (98.4 mm) I.D. master chuck is an all-welded, reinforced steel and tubing construction. The chuck is equipped with extra long chuck adapter attachment lugs. Standard chuck adapters are available in the following sizes: 1" (25.4 mm) I.D., 1 1/2" (38.1 mm) I.D., 2" (50.8 mm) I.D., 2 1/2" ( 63.5 mm) I.D., 3" (76.2 mm) I.D., 3 1/2" (88.9 mm) I.D. and three channel post adapters for 1.2 to 1.5 lbs/ft, 2 to 2.75 lbs/ft, and 3 to 4 lbs/ft posts. |
| Weight: | Approximately 54.6 lbs (24.8 kg) |
| Fasteners: | S.A.E. grade-5 bolts with belleville lock washers. All fasteners are plated. |
| Air Consumption: | 42 CFM (1.19 m³/min) @ 90 PSI (6.4 kg/cm²) |
Technical Specs
| Item | Description |
|---|---|
| Top Cover: | Ductile iron casting, high in strength and ductility has a 1" (25.4 mm) diameter handle designed into the cover for easy handling and carrying. O-Ring sealed. |
| Body: | Ductile iron casting, with excellent wear resistant characteristics. The air inlet is cast into the body and tapped with 3/4" NPT female threaded ports, along with 1" (25.4 mm) diameter ergonomically designed side handles for easy handling and carrying. Chuck bolts pass thru the lower body flange into tapped holes in the chuck mounting plate allowing special chucks to be made in a wide variety of shapes and sizes. |
| Piston: | Alloy steel heat-treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running. |
| Master Chuck and Chuck Adapters: | The 3-7/8" (98.4 mm) I.D. master chuck is an all-welded, reinforced steel and tubing construction. The chuck is equipped with extra long chuck adapter attachment lugs. Standard chuck adapters are available in the following sizes: 1" (25.4 mm) I.D., 1 1/2" (38.1 mm) I.D., 2" (50.8 mm) I.D., 2 1/2" ( 63.5 mm) I.D., 3" (76.2 mm) I.D., 3 1/2" (88.9 mm) I.D. and three channel post adapters for 1.2 to 1.5 lbs/ft, 2 to 2.75 lbs/ft, and 3 to 4 lbs/ft posts. |
| Weight: | Approximately 54.6 lbs (24.8 kg) |
| Fasteners: | S.A.E. grade-5 bolts with belleville lock washers. All fasteners are plated. |
| Air Consumption: | 42 CFM (1.19 m³/min) @ 90 PSI (6.4 kg/cm²) |
Complete tool configurations
Match the model, shank and part number. These are complete tools, not replacement parts.
| Model | Shank / Details | Part Number | Quote |
|---|---|---|---|
| PD-55 | Medium Duty Post Driver 3-7/8" I.D. Master Chuck | 70013 |
Accessory Tools
Step 2
Select Points, Chisels, Etc
Rhino PD-55 · 1-1/2" (38.1 mm) I.D. Chuck Adapter
Rhino PD-55 chuck adapters
Original diagram item5
Description1-1/2" (38.1 mm) I.D. Chuck Adapter
Part # 070613
Rhino PD-55 · 2" (50.8 mm) I.D. Chuck Adapter
Rhino PD-55 chuck adapters
Original diagram item4
Description2" (50.8 mm) I.D. Chuck Adapter
Part # 070612
Rhino PD-55 · 2" (50.8mm) Heavy Channel Post Chuck Adapter (not shown)
Rhino PD-55 chuck adapters
Original diagram item10
Description2" (50.8mm) Heavy Channel Post Chuck Adapter (not shown)
IllustrationNot shown in the original diagram
Part # 070615
Rhino PD-55 · 2-1/2" (63.5 mm) I.D. Chuck Adapter
Rhino PD-55 chuck adapters
Original diagram item3
Description2-1/2" (63.5 mm) I.D. Chuck Adapter
Part # 070611
Rhino PD-55 · 3" (76.2 mm) I.D. Chuck Adapter
Rhino PD-55 chuck adapters
Original diagram item2
Description3" (76.2 mm) I.D. Chuck Adapter
Part # 070610
Rhino PD-55 · 3-1/2" (88.9 mm) I.D. Chuck Adapter
Rhino PD-55 chuck adapters
Original diagram item1
Description3-1/2" (88.9 mm) I.D. Chuck Adapter
Part # 070609
Rhino PD-55 · Channel Post Chuck Adapter - 1.2 to 1.5 lbs/ft Posts
Rhino PD-55 chuck adapters
Original diagram item7
DescriptionChannel Post Chuck Adapter - 1.2 to 1.5 lbs/ft Posts
Part # 070617
Rhino PD-55 · Channel Post Chuck Adapter - 2 to 2.75 lbs/ft Posts
Rhino PD-55 chuck adapters
Original diagram item8
DescriptionChannel Post Chuck Adapter - 2 to 2.75 lbs/ft Posts
Part # 070618
Rhino PD-55 · Channel Post Chuck Adapter - 3 to 4 lbs/ft Posts
Rhino PD-55 chuck adapters
Original diagram item9
DescriptionChannel Post Chuck Adapter - 3 to 4 lbs/ft Posts
Part # 070619
Match the shank, collar and size to your tool. Each button adds that individual accessory to your quote list.
The numbered illustration corresponds to the adapters below; item 10 is not pictured.
| Diagram item & description | Part Number & Quote |
|---|---|
| Item 6 — 1" (25.4 mm) I.D. Chuck Adapter | 070614 |
| Item 5 — 1-1/2" (38.1 mm) I.D. Chuck Adapter | 070613 |
| Item 4 — 2" (50.8 mm) I.D. Chuck Adapter | 070612 |
| Item 10 — 2" (50.8mm) Heavy Channel Post Chuck Adapter (not shown) | 070615 |
| Item 3 — 2-1/2" (63.5 mm) I.D. Chuck Adapter | 070611 |
| Item 2 — 3" (76.2 mm) I.D. Chuck Adapter | 070610 |
| Item 1 — 3-1/2" (88.9 mm) I.D. Chuck Adapter | 070609 |
| Item 7 — Channel Post Chuck Adapter - 1.2 to 1.5 lbs/ft Posts | 070617 |
| Item 8 — Channel Post Chuck Adapter - 2 to 2.75 lbs/ft Posts | 070618 |
| Item 9 — Channel Post Chuck Adapter - 3 to 4 lbs/ft Posts | 070619 |
Longer lengths available for most tools. Call 800-241-9669 for help matching your tool.
