Bull point
For breaking concrete · Jumbo 11X
12″ under collarPart # JB-12P
18″ under collarPart # JB-18P
Chicago Pneumatic
Chicago Pneumatic CP4608D Rivet Buster
D Handle · Inside Trigger
Overview
With an 8” Stroke the CP 4608D Rivet Buster generates 1080 Blows per minute making it useful for Rivet Cutting and Removal, Concrete Demolition on Parking Ramps, Bridge Decks and other weight restricted demolition jobs. The “D” Handle, Inside Trigger, allows the operator to tease the throttle which provides excellent control of the hammers power output.
Retained Piston system. This reduces the possibility of the Piston ejecting out the Chisel end of the hammer.
At just 31lbs this hammer is great for Horizontal and Overhead work.
Features & Applications
- 8” Stroke, 1080 Blows/Min
- Retained Stepped Piston
- “D” Handle, Inside Trigger
- Uses Jumbo 11X Shank Points and Chisels.
- ½” NPTF Air Inlet
- Air consumption: 45 CFM.
CP4608D Part Number
Chicago Pneumatic CP4608D Rivet Buster
8″ Stroke · D Handle
Part No. 8900000151
You Selected CP4608D · Specifications
| Part number | 8900000151 |
|---|---|
| Weight | 31 lb |
| Stroke | 8″ |
| Blows per minute | 1,080 |
| Overall length | 23″ |
| Air consumption | 45 CFM |
| Air inlet | 1/2″ |
| Handle / trigger | D handle / inside trigger |
| Chuck / shank | .890 x 1.125 in taper / Jumbo shank |
| Air inlet thread | 1/2 in NPTF |
Points, Chisels & Accessories
Choose points and chisels for your Jumbo 11X rivet buster. Set quantities, then add them to your EZ Quote.
Narrow chisel
For concrete · Jumbo 11X
12″ under collarPart # JB-12C
18″ under collarPart # JB-18C
Alloy narrow chisel
For rivet cutting · Jumbo 11X
10″ under collarPart # JB-10RC
Back-out punch
For driving out rivets · Jumbo 11X
8″ under collarPart # JB-P03-8
12″ under collarPart # JB-P03-12
Ripper chisel
For thin steel plate · Jumbo 11X
10″ under collarPart # JB-RIP
Wide chisel
For wider cuts · Jumbo 11X
15″ under collarPart # JB-15WC
Sleeve compatibility to be confirmed.
