Tools • Parts • Expert Support • JackHammers and More
Key Chuck Pneumatic Drills
Explore the Airrex Power Bore 800 pneumatic drill with a keyed chuck, D handle and auxiliary side handle. Compare chuck capacity, speed, tool dimensions and air requirements for the drilling task. Chuck capacity describes the bit shank the jaws can hold; it does not by itself establish the maximum hole size in every material. View the Power Bore 800 → Selection guide below →
Selected: Key Chuck Pneumatic Drills
Key Chuck Pneumatic Drills
1 tool · Showing 1–1
For replacement parts, use the Parts Lookup or Drawings Library.
Selection Guide
Choosing A Key Chuck Pneumatic Drill
Check the bit shank and application, then review the drill’s speed, handling and air connections.
1 Define The Drilling Task
Identify the material, hole diameter, depth and working space.
2 Check The Chuck And Bit
Match the bit shank to the chuck capacity and confirm suitability for the drill and task.
3 Review Speed And Air
Check rotation, speed, tool dimensions and the required air setup.
Key Chuck Pneumatic Drills Questions & Answers
What Does Key Chuck Mean?
A keyed chuck uses a chuck key to tighten its jaws around the drill-bit shank. Match the shank to the chuck’s specified capacity and follow the drill’s operating instructions when fitting a bit.
Does A 5/8-Inch Chuck Mean Every 5/8-Inch Hole Is Suitable?
No. Chuck capacity describes the shank size the chuck accepts. Suitable hole diameter also depends on the bit, material and drill’s rated application. Provide those details when asking about a setup.
Is The Power Bore 800 Reversible?
The catalog lists the Power Bore 800 as non-reversible, with an 800 RPM speed specification. Check those characteristics against the drilling operation rather than assuming reverse is available.
Is The Spindle Thread The Same As Chuck Capacity?
They describe different connections. The spindle thread identifies the chuck’s mounting connection; chuck capacity describes the bit-shank size its jaws can hold. Both matter when identifying a replacement chuck.
How Does This Differ From A Core Drill Or Rock Drill?
These tools use different drilling arrangements and connections. The CP 0315 core drill has a threaded output, while rock drills use a drill-steel and bit system. Browse Core Drills → Browse Rock Drills →
What Details Help With A Replacement Chuck Or Parts Request?
Provide the drill model, chuck markings, spindle thread and the part number if known. Use the matching drawing to identify the component rather than relying on chuck capacity alone. Find Key Chuck Drill Drawings →
Need Help Choosing?
Have the drill model, bit-shank size, material, hole dimensions and chuck markings ready.
