American Pneumatic
117 Paving Breaker
Overview
This “T” Handle Hammer is the same as the APT 118 except that it is designed as a Paving Breaker
The 117 is a Lightweight Paving Breaker and is commonly used on jobs that have Weight Limit Restrictions such as Parking Ramps, Bridge Decks and Road Repair projects. Additionally it is used for Trench Digging, Concrete Demolition, Clay Digging, Tunnel Excavating, Foundation Work, Pin Driving and much more.
Features & Applications
- Convenient “T” Handle design.
- Lightweight and Hard Hitting.
- Standard Four Bolt Backhead Design with Rubber Grips.
- Latch Tool Retainer
- Low Air Consumption
- Often used for Weight Limit Restricted jobs.
Model & part-number identification
American Pneumatic APT 117 (M117) Paving Breaker
Old Part No. 5199 New Part No. 1280582251 (7/8” × 3-1/4”)
Old Part No. 5200, New Part No. 1280583301 ( 1” x 4-1/4”)
Complete tool: 117-ATool part # 5199
7/8" x 3-1/4" HEX (A)
Your BEST price is just a call away.
Adds the complete tool shown above—not an individual replacement part. Add more tools to build one quote request, then review your quote list.
1-800-241-9669
Need help with a model or part? Talk to Mining Auger & Tool Works.
Technical Specs
| Part No. | 5199 | 5200 |
|---|---|---|
| Chuck Size (inches) | 7/8 x 3-1/4 | 1 x 4-1/4 |
| Bore | 1-3/4 | 1-3/4 |
| Stroke | 3-3/8 | 3-3/8 |
| B.P.M. | 1850 | 1850 |
| CFM @ 90 PSI (inlet pressure) | 34-38 | 34-38 |
| Weight (lbs.) | 33 | 33 |
| Length (inches) | 21-3/4 | 21-3/4 |
Complete tool configurations
Match the model, shank and part number. These are complete tools, not replacement parts.
| Model | Shank / Details | Part Number | Quote |
|---|---|---|---|
| 117-A | 7/8" x 3-1/4" HEX (A) | 5199 | |
| 117-C | 1" x 4-1/4" HEX (C) | 5200 |
Accessory Tools
Match the shank, collar and size to your tool. Each button adds that individual accessory to your quote list.
| Tool | Length under collar (in.) | Details |  7/8" × 3-1/4" shankPart Number & Quote |  1" × 4-1/4" shankPart Number & Quote |
|---|---|---|---|---|
 Asphalt Cutter | 11" | 5" Wide Blade | 78-ac | 100-ac |
 Bushing Tool | 8" | 16 Teeth | 78-bt | 100-bt |
 Clay Spade | 16" | 5-1/2" Wide Blade | 78-cs | 100-cs |
 Digging Chisel | 16" | 3" Wide Blade | 78-dc | 100-dc |
 Pin Driver | 8" | Socket: 3/8" Deep x 1-3/4" Dia. | 78-sd | 100-sd |
 Frost Wedge | 17" | 2" Wide Blade | 78-fw | 100-fw |
 Ground Rod Driver | — | SOCKET DIAMETER: 11/16" | 78-grd(a) | 100-grd(a) |
| — | Socket diameter13/16" | 78-grd(b) | 100-grd(b) | |
| — | Socket diameter1" | 78-grd(c) | 100-grd(c) | |
| — | Socket diameter1-1/8" | 78-grd(d) | 100-grd(d) | |
 Moil Point | 14" | LONGER LENGTHS AVAILABLE | 78p-14 | 100p-14 |
| 18" | LONGER LENGTHS AVAILABLE | 78p-18 | 100p-18 | |
 Narrow Chisel | 14" | LONGER LENGTHS AVAILABLE | 78c-14 | 100c-14 |
| 18" | LONGER LENGTHS AVAILABLE | 78c-18 | 100c-18 | |
 Wide Chisel | 14" | LONGER LENGTHS AVAILABLE | 78c3-14 | 100c3-14 |
| 18" | LONGER LENGTHS AVAILABLE | 78c3-18 | 100c3-18 | |
 Detachable Shank | 7-3/4" | FOR USE WITH: TAMPER PAD TENT STAKE DRIVER SHEATHING DRIVER | 78-ds | 100-ds |
| Separate attachments — use with a detachable shank. Confirm the holder and fit. | ||||
 Tamping Pad | — | 6" SQUARE | tps-6 | |
| — | 8" SQUARE | tps-8 | ||
| — | 7" ROUND | tpr-7 | ||
 Tent Stake Driver | — | 2" | tsd-200 | |
| — | 2-1/2" | tsd-250 | ||
 Sheathing Driver | — | 2" | tsh-200 | |
| — | 3" | tsh-300 | ||
Longer lengths available for most tools. Call 800-241-9669 for help matching your tool.
More Paving Breakers
View all →
