Chicago Pneumatic
1210 Paving Breaker
This tool is lightweight, fast and very hard hitting. It is most often used on jobs where weight restrictions are in place such as ramps, bridge decks and some highway jobs.
"S" Models are equipped with mufflers.
"SVR" Models are equipped with mufflers and vibration reduction handles.
Complete tool: 1210Tool part # 8900003001
1" x 4-1/4" HEX (C)
Your BEST price is just a call away.
Adds the complete tool shown above—not an individual replacement part. Add more tools to build one quote request, then review your quote list.
1-800-241-9669
Need help with a model or part? Talk to Mining Auger & Tool Works.
Technical Specs
| Part Number | 8900003001 | 8900003003 | 8900003009 | 8900003007 | 8900003005 | 8900003010 | 8900003008 |
|---|---|---|---|---|---|---|---|
| Description | CP 1210 | CP 1210 S | CP 1210 S | CP 1210 S | CP 1210 SVR | CP 1210 SVR | CP 1210 SVR |
| Weight (lb) | 44.0 | 48.0 | 50.0 | 50.0 | 54.0 | 55.0 | 56.2 |
| Length (inch) | 21 | 21 | 23 | 23 | 24 | 26 | 26 |
| Air consumption (cfm) | 56.2 | 56.2 | 56.2 | 56.2 | 56.2 | 56.2 | 56.5 |
| Blows per minute | 1400 (23.33/s) | 1400 (23.33/s) | 1400 (23.33/s) | 1400 (23.33/s) | 1400 (23.33/s) | 1400 (23.33/s) | 1400 (23.33/s) |
| Vibration level 3-axes ISO 20643 (m/sec²) | - - - | 14.6 | 14.6 | 14.6 | 5.3 | 5.3 | 5.3 |
| Chuck size (inch) | 1 x 4-1/4 | 1 x 4-1/4 | 1-1/4 x 6 | 1-1/8 x 6 | 1 x 4-1/4 | 1-1/4 x 6 | 1-1/8 x 6 |
Complete tool configurations
Match the model, shank and part number. These are complete tools, not replacement parts.
| Model | Shank / Details | Part Number | Quote |
|---|---|---|---|
| 1210 | 1" x 4-1/4" HEX (C) | 8900003001 |
| Model | Shank / Details | Part Number | Quote |
|---|---|---|---|
| 1210S | 1" x 4-1/4" HEX (C) | 8900003003 | |
| 1210S | 1-1/8" x 6" | 8900003007 | |
| 1210S | 1-1/4" x 6" | 8900003009 |
| Model | Shank / Details | Part Number | Quote |
|---|---|---|---|
| 1210SVR | 1" x 4-1/4" HEX (C) | 8900003005 | |
| 1210SVR | 1-1/8" x 6" | 8900003008 | |
| 1210SVR | 1-1/4" x 6" | 8900003010 |
Accessory Tools
Match the shank, collar and size to your tool. Each button adds that individual accessory to your quote list.
| Tool | Length under collar (in.) | Details |  1" × 4-1/4" shankPart Number & Quote |  1-1/8" × 6" shankPart Number & Quote |  1-1/4" × 6" shankPart Number & Quote |
|---|---|---|---|---|---|
 Asphalt Cutter | 11" | 5" Wide Blade | 100-ac | 118-ac | 125-ac |
 Bushing Tool | 8" | 16 Teeth | 100-bt | 118-bt | 125-bt |
 Clay Spade | 16" | 5-1/2" Wide Blade | 100-cs | 118-cs | 125-cs |
 Digging Chisel | 16" | 3" Wide Blade | 100-dc | 118-dc | 125-dc |
 Pin Driver | 8" | Socket: 3/8" Deep x 1-3/4" Dia. | 100-sd | 118-sd | 125-sd |
 Frost Wedge | 17" | 2" Wide Blade | 100-fw | 118-fw | 125-fw |
 Ground Rod Driver | — | SOCKET DIAMETER: 11/16" | 100-grd(a) | 118-grd(a) | 125-grd(a) |
| — | Socket diameter13/16" | 100-grd(b) | 118-grd(b) | 125-grd(b) | |
| — | Socket diameter1" | 100-grd(c) | 118-grd(c) | 125-grd(c) | |
| — | Socket diameter1-1/8" | 100-grd(d) | 118-grd(d) | 125-grd(d) | |
 Moil Point | 14" | LONGER LENGTHS AVAILABLE | 100p-14 | 118p-14 | 125p-14 |
| 18" | LONGER LENGTHS AVAILABLE | 100p-18 | 118p-18 | 125p-18 | |
 Narrow Chisel | 14" | LONGER LENGTHS AVAILABLE | 100c-14 | 118c-14 | 125c-14 |
| 18" | LONGER LENGTHS AVAILABLE | 100c-18 | 118c-18 | 125c-18 | |
 Wide Chisel | 14" | LONGER LENGTHS AVAILABLE | 100c3-14 | 118c3-14 | 125c3-14 |
| 18" | LONGER LENGTHS AVAILABLE | 100c3-18 | 118c3-18 | 125c3-18 | |
 Pipe Driver | 11" | PIPE SIZE: 1" | 100-pd(a) | 118-pd(a) | 125-pd(a) |
| 11" | Pipe size1-1/4" | 100-pd(b) | 118-pd(b) | 125-pd(b) | |
| 11" | Pipe size1-1/2" | 100-pd(c) | 118-pd(c) | 125-pd(c) | |
| 11" | Pipe size2" | 100-pd(d) | 118-pd(d) | 125-pd(d) | |
 Rock Buster | 13" | Taper Range: 1-1/4" to 2-1/4" Dia | 100-rb | 118-rb | 125-rb |
 Splitting Wedge | 17-1/2" | Drill Hole Size 2 x 12" Deep | 100-sw | 118-sw | 125-sw |
 Detachable Shank | 7-3/4" | FOR USE WITH: TAMPER PAD TENT STAKE DRIVER SHEATHING DRIVER | 100-ds | 118-ds | 125-ds |
| Separate attachments — use with a detachable shank. Confirm the holder and fit. | |||||
 Tamping Pad | — | 6" SQUARE | tps-6 | ||
| — | 8" SQUARE | tps-8 | |||
| — | 7" ROUND | tpr-7 | |||
 Tent Stake Driver | — | 2" | tsd-200 | ||
| — | 2-1/2" | tsd-250 | |||
 Sheathing Driver | — | 2" | tsh-200 | ||
| — | 3" | tsh-300 | |||
Longer lengths available for most tools. Call 800-241-9669 for help matching your tool.
More Paving Breakers
View all →
