- Part Number
- 5299
- Stroke (inches)
- 2
- Chuck Size (inches)
- .580 Hex
- Bore (inches)
- 1-1/8
- Blows/Min. [/sec.]
- 2100 [35]
- CFM ( @ 90psi inlet pressure)
- 32-34
- Weight (lbs.)
- 12
- Length (inches)
- 13-1/4
- Air Inlet (NPT)
- 7/8-24
American Pneumatic
American Pneumatic 650 Series Chipping Hammer
.580″ Hex or .680″ Round
650 Series Part Numbers
American Pneumatic 650 Series Chipping Hammer
6522" Stroke x 0.580 HexPart No. 5299
6533" Stroke x 0.580 HexPart No. 5301
6544" Stroke x 0.580 HexPart No. 5303
6522" Stroke x 0.680 RoundPart No. 5298
6533" Stroke x 0.680 RoundPart No. 5300
6544" Stroke x 0.680 RoundPart No. 5302
American Pneumatic APT 650 (M650) Series Chipping Hammer
Old Part No. 5300-04, New Part No. 1280582865 .680 Round x Oval Collar
Old Part No. 5301-04, New Part No. 1280582869 .580 Hex x Oval Collar
Overview
This is a “P” Handle Outside Trigger General Purpose hammer. It is a very popular tool that has been in use for many years. The Flapper Automatic Valve design allows debris to pass through and also allows for proper lubrication.
Features & Applications
- Available in 2”, 3” or 4” stroke versions.
- Chuck options are .680 Round or .580 Hex
- Reliable Flapper Automatic valve.
- Hardened Alloy Steel Cylinder.
- Adjustable Exhaust Deflector.
3-inch Stroke Part Numbers (M653)
American Pneumatic APT 650 (M653) Series Chipping Hammer
Old Part No. 5300-04, New Part No. 1280582865 .680 Round x Oval Collar
Old Part No. 5301-04, New Part No. 1280582869 .580 Hex x Oval Collar
These references identify the 3-inch stroke version. Compare the configurations below, and confirm the model, chuck and retainer when requesting a quote.
Supplied byJackHammers.com
Supplied byJackHammers.com
Step 1
Select Chuck Size:
You Selected.580″ Hex
Match the collar and actual retainer before ordering.Hex or Round
Step 2
Select Stroke:
| Select Your Hammer | |||
|---|---|---|---|
| Part Number | 5299 | 5301 | 5303 |
| Stroke (inches) | 2 | 3 | 4 |
| Chuck Size (inches) | .580 Hex | .580 Hex | .580 Hex |
| Bore (inches) | 1-1/8 | 1-1/8 | 1-1/8 |
| Blows/Min. [/sec.] | 2100 [35] | 1650 [27] | 1375 [23] |
| CFM ( @ 90psi inlet pressure) | 32-34 | 33-35 | 34-36 |
| Weight (lbs.) | 12 | 14 | 16 |
| Length (inches) | 13-1/4 | 15-1/4 | 16 |
| Air Inlet (NPT) | 7/8-24 | 7/8-24 | 7/8-24 |
- Part Number
- 5301
- Stroke (inches)
- 3
- Chuck Size (inches)
- .580 Hex
- Bore (inches)
- 1-1/8
- Blows/Min. [/sec.]
- 1650 [27]
- CFM ( @ 90psi inlet pressure)
- 33-35
- Weight (lbs.)
- 14
- Length (inches)
- 15-1/4
- Air Inlet (NPT)
- 7/8-24
- Part Number
- 5303
- Stroke (inches)
- 4
- Chuck Size (inches)
- .580 Hex
- Bore (inches)
- 1-1/8
- Blows/Min. [/sec.]
- 1375 [23]
- CFM ( @ 90psi inlet pressure)
- 34-36
- Weight (lbs.)
- 16
- Length (inches)
- 16
- Air Inlet (NPT)
- 7/8-24
| Select Your Hammer | |||
|---|---|---|---|
| Part Number | 5298 | 5300 | 5302 |
| Stroke (inches) | 2 | 3 | 4 |
| Chuck Size (inches) | .680 Round | .680 Round | .680 Round |
| Bore (inches) | 1-1/8 | 1-1/8 | 1-1/8 |
| Blows/Min. [/sec.] | 2100 [35] | 1650 [27] | 1375 [23] |
| CFM ( @ 90psi inlet pressure) | 32-34 | 33-35 | 34-36 |
| Weight (lbs.) | 12 | 14 | 16 |
| Length (inches) | 13-1/4 | 15-1/4 | 16 |
| Air Inlet (NPT) | 7/8-24 | 7/8-24 | 7/8-24 |
- Part Number
- 5298
- Stroke (inches)
- 2
- Chuck Size (inches)
- .680 Round
- Bore (inches)
- 1-1/8
- Blows/Min. [/sec.]
- 2100 [35]
- CFM ( @ 90psi inlet pressure)
- 32-34
- Weight (lbs.)
- 12
- Length (inches)
- 13-1/4
- Air Inlet (NPT)
- 7/8-24
- Part Number
- 5300
- Stroke (inches)
- 3
- Chuck Size (inches)
- .680 Round
- Bore (inches)
- 1-1/8
- Blows/Min. [/sec.]
- 1650 [27]
- CFM ( @ 90psi inlet pressure)
- 33-35
- Weight (lbs.)
- 14
- Length (inches)
- 15-1/4
- Air Inlet (NPT)
- 7/8-24
- Part Number
- 5302
- Stroke (inches)
- 4
- Chuck Size (inches)
- .680 Round
- Bore (inches)
- 1-1/8
- Blows/Min. [/sec.]
- 1375 [23]
- CFM ( @ 90psi inlet pressure)
- 34-36
- Weight (lbs.)
- 16
- Length (inches)
- 16
- Air Inlet (NPT)
- 7/8-24
You Selected
652Part # 5299.580″ HexRetainer: Confirm retainer style
Your Quote
0 items · 0 pieces
Add a hammer or accessory to get started.
Step 3
Select Points, Chisels, Etc
The following Points, Chisels, etc. are used with Standard Solid Retainers.
The following Points, Chisels, etc. are for use with Compatible Round-Collar Retainers.
.580″ Hex × Oval Collar
Match the collar and retainer on your hammer.
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
Moil Point
.580″ Hex × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
9″
12″OCHS-12P
18″OCHS-18P
24″OCHS-24P
Request Longer Lengths
Narrow Chisel
.580″ Hex × Oval Collar
Standard Lengths: 9″ / 12″ / 18″ / 24″
Length Under CollarQuantity
9″OCHS-9C
12″OCHS-12C
18″OCHS-18C
24″OCHS-24C
Request Longer Lengths
2″ Wide Blade Chisel
.580″ Hex × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCHS-12C2
18″OCHS-18C2
24″OCHS-24C2
Request Longer Lengths
3″ Wide Blade Chisel
.580″ Hex × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCHS-12C3
18″OCHS-18C3
24″OCHS-24C3
Request Longer Lengths
4½″ Clay Spade
.580″ Hex × Oval Collar
Standard Lengths: 10″
Length Under CollarQuantity
10″OCHS-CS
All-Steel Bushing Tool
.580″ Hex × Oval Collar
Standard Lengths: 8″
Length Under CollarQuantity
8″OCHS-BT
Pin Driver
.580″ Hex × Oval Collar
Request the Size You Need.
Tell us your Pin Diameter, Length, and Chuck Configuration.
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
