Home / Tools / Chipping Hammers / K Series
Do This First!
K Series Part Numbers Ingersoll Rand K Series Chipping Hammer
K2LA1 1-3/4" Stroke x 0.580 Hex Part No. K2LA1
K2LA2 1-3/4" Stroke x 0.680 Round Part No. K2LA2
Overview
The Ingersoll Rand K Series Pneumatic Chipping Hammer is a light-duty tool for general chipping. A swan-neck handle with an outside trigger supports handheld operation.
K2LA versions are offered with or without the standard retainer, so specify the complete version when ordering.
Features & Applications
Grooved barrel and lock-spring retainer.
Replaceable piston.
Uses oval-collar accessories.
K2LA variants: 1.75-inch stroke and 3,600 blows per minute at 90 psi.
K2LA shank choices: .580 Hex or .680 Round.
Specify the retainer-equipped version when a complete retained-tool setup is needed.
K Series Part Numbers K2LA1-Hex · 1-3/4″ stroke · Part No. K2LA1
K2LA2-Round · 1-3/4″ stroke · Part No. K2LA2
Confirm the model, chuck, collar and retainer when requesting a quote.
Need help? 1-800-241-9669
Step 1
Select Chuck Size: .580″ Hex OR .680″ Round
.580″ HEX Shank OCHS · Oval Collar Shown ✓ Selected Hex Chuck Hammer Uses Hex Shank Chisels .680″ ROUND Shank OCRS · Oval Collar Shown ○ Select Round Chuck Hammer Uses Round Shank Chisels
Hex or Round Step 2
Hammer Specifications
K Series hammer specifications Your Hammer 1¾″ K2LA1-Hex .580″ Hex Shank Part Number K2LA1 Stroke (inches) 1.75 Chuck/Shank Size (inches) .580 Hex Vibration level 3 axes (ISO 20643) (m/sec²) 18.0 uncertainty: 5.6 Retainer Type None Blows/Min. [/sec.] 3600 [60] Bore (inches) 0.88 Air Consumption @ Load cfm (L/min) 18 (510) Air Inlet NPT (inch) 1/4 Min Hose Size I.D. (inch) 1/2 Weight (lbs.) 6.0 Length w/o accy (inches) 10.88
1¾″ K2LA1-Hex .580″ Hex Shank
Part Number K2LA1
Stroke (inches) 1.75
Chuck/Shank Size (inches) .580 Hex
Vibration level 3 axes (ISO 20643) (m/sec²) 18.0 uncertainty: 5.6
Retainer Type None
Blows/Min. [/sec.] 3600 [60]
Bore (inches) 0.88
Air Consumption @ Load cfm (L/min) 18 (510)
Air Inlet NPT (inch) 1/4
Min Hose Size I.D. (inch) 1/2
Weight (lbs.) 6.0
Length w/o accy (inches) 10.88
K Series hammer specifications Your Hammer 1¾″ K2LA2-Round .680″ Round Shank
Part Number K2LA2 Stroke (inches) 1.75 Chuck/Shank Size (inches) .680 Rnd Vibration level 3 axes (ISO 20643) (m/sec²) 18.0 uncertainty: 5.6 Retainer Type None Blows/Min. [/sec.] 3600 [60] Bore (inches) 0.88 Air Consumption @ Load cfm (L/min) 18 (510) Air Inlet NPT (inch) 1/4 Min Hose Size I.D. (inch) 1/2 Weight (lbs.) 6.0 Length w/o accy (inches) 10.88
1¾″ K2LA2-Round .680″ Round Shank
Part Number K2LA2
Stroke (inches) 1.75
Chuck/Shank Size (inches) .680 Rnd
Vibration level 3 axes (ISO 20643) (m/sec²) 18.0 uncertainty: 5.6
Retainer Type None
Blows/Min. [/sec.] 3600 [60]
Bore (inches) 0.88
Air Consumption @ Load cfm (L/min) 18 (510)
Air Inlet NPT (inch) 1/4
Min Hose Size I.D. (inch) 1/2
Weight (lbs.) 6.0
Length w/o accy (inches) 10.88 You Selected K2LA1-Hex Part # K2LA1 .580″ Hex Retainer: None
Add To EZ Quote
Your Quote 0 items · 0 pieces
Add a hammer or accessory to get started.
Continue To Points, Chisels, Etc ↓ Review Your Quote →
Step 3
Select Points, Chisels, Etc The following Points, Chisels, etc. are used with Standard Solid Retainers.
The following Points, Chisels, etc. are for use with Compatible Round-Collar Retainers.
.580″ Hex × Oval Collar
Oval Collar Round Collar
Match the collar and retainer on your hammer.
Compare retainer and collar styles →
Moil Point .580″ Hex × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under Collar Quantity
Add To EZ Quote
Request Longer Lengths Narrow Chisel .580″ Hex × Oval Collar
Standard Lengths: 9″ / 12″ / 18″ / 24″
Length Under Collar Quantity
Add To EZ Quote
Request Longer Lengths 2″ Wide Blade Chisel .580″ Hex × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under Collar Quantity
Add To EZ Quote
Request Longer Lengths 3″ Wide Blade Chisel .580″ Hex × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under Collar Quantity
Add To EZ Quote
Request Longer Lengths 4½″ Clay Spade .580″ Hex × Oval Collar
Standard Lengths: 10″
Length Under Collar Quantity
Add To EZ Quote
All-Steel Bushing Tool .580″ Hex × Oval Collar
Standard Lengths: 8″
Length Under Collar Quantity
Add To EZ Quote
Pin Driver .580″ Hex × Oval Collar
Request the Size You Need.
Tell us your Pin Diameter, Length, and Chuck Configuration.
Request Pin Driver Sizing
Your Quote 0 pieces added
Add a hammer, accessory tools or both.
Your quote is empty.
We’ll confirm pricing and availability. No payment is taken with this request.
Request Quote → Open full quote list → Review Quote · 0 Pieces →
Request Pin Driver Sizing × Tell us the Pin Diameter and Length you need. We’ll confirm the connection and availability.
.580″ Hex × Oval Collar Requested
To select tools and build your quote, please enable JavaScript or call 1-800-241-9669 .
Contact & Quotes
Let’s Find The Right Tool.
Prefer to talk? 1-800-241-9669
