-
www.JackHammers.com
Your most reliable source for top quality pneumatic tools, parts, service and experience
1-800-241-9669 matwinc@gmail.com
Search suggestions - click me!
Search term suggestions:×
- Check spelling (we don't use spellcheck)
- Use tool type, brand, model, part number, etc.
- Avoid filler words (a, the, for, verbs, etc.)
- Call us if you have a question (see Contact page)
- Example: "Airrex 400 paving breaker"
CP
Model: 0111
Clay Digger / Pick Hammer
Used for light demolition, pin driving, and digging clay. A reliable "ring valve" hammer.
| Model | Chuck / Shank Size (inches) | Part Number |
| CP 0111 CHIT (Inside Trigger) |
7/8" x 3-1/4" HEX | 8900000141 |
| CP 0111 CHLA (Outside Trigger) |
1" x 4-1/4" HEX | 8900000120 |
| CP 0111 THLA (Outside Trigger) |
1" x 4-1/4" HEX | 0T022079 |
| Model | Part # | Weight | Length | Bore | Stroke | Blows/min | Air Con | PSI | Chuck |
| CP 0111 CHIT [Inside Trigger] |
8900000141 | 29 lbs. | 21-1/2" | 1.6" | 3.38" | 1800 | 45cfm | 90psi | 7/8" x 3-1/4" Hex |
| CP 0111 CHLA [Outside Trigger] |
8900000120 | 29 lbs. | 22-1/2" | 1.63" | 3.5" | 1800 | 45cfm | 90psi | 1" x 4-1/4" Hex |
| CP 0111 THLA [Outside Trigger] |
0T022079 | 36 lbs. | 20" | 1.63" | 3.5" | 1800 | 45cfm | 90psi | 1" x 4-1/4" Hex |
| Clay Digger Bits | ||||
| Longer Lengths Available for Most Tools - Call: 800‐241‐9669 | ||||
| Tool: | Under Collar Length (inch): | Details: |  Part Number: |
 Part Number: |
 Asphalt Cutter |
11" | 5" Wide Blade | 78-AC | 100-AC |
 Bushing Tool |
8" | 16 Teeth | 78-BT | 100-BT |
 Clay Spade |
16" | 5-1/2" Wide Blade | 78-CS | 100-CS |
 Digging Chisel |
16" | 3" Wide Blade | 78-DC | 100-DC |
 Pin Driver |
8" | Socket: 3/8" Deep x 1-3/4" Dia. |
78-SD | 100-SD |
 Frost Wedge |
17" | 2" Wide Blade | 78-FW | 100-FW |
 Ground Rod Driver |
SOCKET DIAMETER: 11/16" | 78-GRD(A) | 100-GRD(A) | |
| 13/16" | 78-GRD(B) | 100-GRD(B) | ||
| 1" | 78-GRD(C) | 100-GRD(C) | ||
| 1-1/8" | 78-GRD(D) | 100-GRD(D) | ||
 Moil Point |
14" | LONGER LENGTHS AVAILABLE | 78P-14 | 100P-14 |
| 18" | 78P-18 | 100P-18 | ||
 Narrow Chisel |
14" | LONGER LENGTHS AVAILABLE | 78C-14 | 100C-14 |
| 18" | 78C-18 | 100C-18 | ||
 Wide Chisel |
14" | LONGER LENGTHS AVAILABLE | 78C3-14 | 100C3-14 |
| 18" | 78C3-18 | 100C3-18 | ||
 Detachable Shank |
7-3/4" | FOR USE WITH: TAMPER PAD TENT STAKE DRIVER SHEATHING DRIVER |
78-DS | 100-DS |
 Tamping Pad |
6" SQUARE | TPS-6 | ||
| 8" SQUARE | TPS-8 | |||
| 7" ROUND | TPR-7 | |||
 Tent Stake Driver |
2" | TSD-200 | ||
| 2-1/2" | TSD-250 | |||
 Sheathing Driver |
2" | TSH-200 | ||
| 3" | TSH-300 | |||
0111 Safety Manual
Brands
