Bull Point
For Breaking Concrete · Jumbo 11X
10″ under collarPart # JB-10P
12″ under collarPart # JB-12P
18″ under collarPart # JB-18P
Airrex
Airrex Viking-8 Rivet Buster
8-inch stroke · Jumbo 11X shank
Viking Part Numbers
Airrex Viking Rivet Buster
Viking-66-inch stroke · Jumbo 11X shankPart No. D2606
Viking-88-inch stroke · Jumbo 11X shankPart No. D2608
Viking-1111-inch stroke · Jumbo 11X shankPart No. D2611
Viking-14Viking 14 Rivet BusterPart No. D2614
Overview
The Airrex Viking Pneumatic Rivet Busters are available in 6”, 8”, 11” and 14” Stroke versions. The longer the stroke the more energy produced.
The Viking Series are time proven tools and are designed for Heavy-Duty work, such as 6” plus Concrete Demolition, Parking Ramp and Bridge Decks Renovations, Foundations, Rivet Cutting, Rivet Removal, Ready Mix Drum Cleaning, Pin Punching, and so much more!
Features & Applications
- D2606: Viking-6 Stroke, 1100 bpm, 20.75” Long, 29lbs.
- D2608: Viking-8 Stroke, 1140 bpm, 22” Long, 30lbs.
- D2611: Viking-11 Stroke, 850 bpm, 25” Long, 34lbs.
- 6-, 8- and 11-inch models: 28–42 cfm at 90 psi.
- D2614: Viking-14, 600 bpm, 28-5/8 inches long, 34 lb, 51 cfm at 90 psi. The handle configuration for the 14-inch model is not listed; confirm when ordering.
Viking Part Numbers
Viking-6 · Part # D2606
Viking-8 · Part # D2608
Viking-11 · Part # D2611
Viking-14 · Part # D2614
Step 1
Choose Your Stroke
Good Choice!
| Select Your Hammer | ||||
|---|---|---|---|---|
| Stroke | 6″ | 8″ | 11″ | 14″ |
| Blows Per Minute | 1100 | 1140 | 850 | 600 |
| Weight | 29 LB | 30 LB | 34 LB | 34 LB |
| Length | 20.75 IN | 22 IN | 25 IN | 28-5/8 IN |
| Air Consumption | 28 CFM | 35 CFM | 42 CFM | 51 CFM @ 90 PSI |
| Handle Configuration | Inside Trigger | Inside Trigger | Inside Trigger | Not listed |
| Shank Size | Jumbo 11X | Jumbo 11X | Jumbo 11X | Jumbo 11X |
| Specification | Viking-6 | Viking-8 | Viking-11 | Viking-14 |
| Tool part number | D2606 | D2608 | D2611 | D2614 |
| Bore / Piston | 1-3/16 IN | 1-3/16 IN | 1-3/16 IN | 1-3/16 IN |
| Inlet Size | 1/2 NPT | 1/2 NPT Female | 1/2 NPT | Not listed |
| Muffler | No | No | No | Not listed |
| Recommended Hose Size | 1/2 IN | 1/2 IN | 1/2 IN | Not listed |
Step 2
Select Points, Chisels, Etc
The following Points, Chisels, etc. are…
Jumbo 11X Shank
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
Narrow Chisel
For Concrete · Jumbo 11X
10″ under collarPart # JB-10C
12″ under collarPart # JB-12C
18″ under collarPart # JB-18C
Alloy Rivet Cutting Chisel
For Rivet Cutting · Jumbo 11X
10″ under collarPart # JB-10RC
Back-Out Punch
Representative PhotoFor Driving Out Rivets · Jumbo 11X
8″ under collarPart # JB-P03-8
12″ under collarPart # JB-P03-12
Wide Chisel
Requires J-LSS (Lower Split Sleeve)
Part # jb-15wc · 15"
Bushing Tool
J-LSS Split Lower Sleeve Required To Use This Tool
Call for Pricing and AvailabilityStep 3
Wear / Service Parts
Use the parts drawing for Viking-8 or call us to confirm replacement wear parts.
Air Hose Options
Hose Only
Call to confirm hose size, fittings and availability.
Hose With Filter
Call to confirm hose size, fittings and availability.
