Bull Point
For Breaking Concrete · Jumbo 11X
10″ under collarPart # JB-10P
12″ under collarPart # JB-12P
18″ under collarPart # JB-18P
American Pneumatic
American Pneumatic 633 D Handle Rivet Buster
D handle; Inside trigger; 6-inch stroke; Jumbo 11X tool steel
633 D Handle Part Number
American Pneumatic 633 D Handle Rivet Buster
633 D HandleD handle; Inside trigger; 6-inch stroke; Jumbo 11X tool steelPart No. 1280583180
American Pneumatic APT 633 (M633CN) Rivet Buster
Old Part No. 18848, New Part No. 1280583180 (Jumbo 11X Shank)
APT 633-D Inside Trigger, 26lb, 6” Stroke, Demolition Hammer.
Overview
This is the same Hammer as the APT133 but is lighter and has Less Breaking Power.
It is the same Hammer as the APT633-PG Except for the Handle Configuration.
This tool is also Excellent for all positions of Demolition Hammering including Horizontal and Overhead work. Because of its light weight and ease of handling it is frequently used on Parking Ramps, Bridge Decks, Road Work, Cleaning Concrete Ready Mix Trucks and all around concrete breaking. Additionally, with the correct accessory tools it is used for Cutting Rivets, Removing Rivets Driving Pins and more.
Features & Applications
- Often used for Weight Limit Restricted jobs.
- Rivet cutting and Removal, Pin Driving, and Cleaning Concrete Ready Mix Trucks.
- “D” Style Handle, Inside Trigger, Hardened Alloy Steel Cylinder.
- Uses Jumbo 11X Tool Steel.
- Replaceable Upper and Lower Sleeves and Bumpers.
- Uses convenient Retainer Lock Springs
- Air Requirement: Approximately 42–46 cfm at 90 psi.
633 D Handle Part Numbers
633 D Handle · Part # 1280583180
Step 1
Choose Your Stroke
Good Choice!
| Select Your Hammer | |
|---|---|
| Stroke (in.) | 6 |
| Blows per minute | 1100 |
| Part Number | 1280583180 |
| Air consumption at 90 PSI (CFM) | 42-46 |
| Air inlet | 1/2 inch NPT female |
| Handle | D handle |
| Specification | 633 D Handle |
| Model | 633 D Handle |
| Manufacturer model | M633CN |
| Current tool part number | 1280583180 |
| Old tool part number | 18848 |
| Trigger | Inside trigger |
| Bore (in.) | 1-3/16 |
| Tool steel | Jumbo 11X |
Step 2
Select Points, Chisels, Etc
The following Points, Chisels, etc. are…
Jumbo 11X Shank
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
Narrow Chisel
For Concrete · Jumbo 11X
10″ under collarPart # JB-10C
12″ under collarPart # JB-12C
18″ under collarPart # JB-18C
Alloy Rivet Cutting Chisel
For Rivet Cutting · Jumbo 11X
10″ under collarPart # JB-10RC
Back-Out Punch
Representative PhotoFor Driving Out Rivets · Jumbo 11X
8″ under collarPart # JB-P03-8
12″ under collarPart # JB-P03-12
Wide Chisel
Requires J-LSS (Lower Split Sleeve)
Part # jb-15wc · 15"
Bushing Tool
J-LSS Split Lower Sleeve Required To Use This Tool
Call for Pricing and AvailabilityStep 3
Wear / Service Parts
Use the parts drawing for 633 D Handle or call us to confirm replacement wear parts.
Air Hose Options
Hose Only
Call to confirm hose size, fittings and availability.
Hose With Filter
Call to confirm hose size, fittings and availability.
