Bull Point
For Breaking Concrete · Jumbo 11X
10″ under collarPart # JB-10P
12″ under collarPart # JB-12P
18″ under collarPart # JB-18P
Chicago Pneumatic
Chicago Pneumatic CP4608D Rivet Buster
D-Series 8" Rivet Buster
D-Series Part Numbers
Chicago Pneumatic D-Series Rivet Buster
CP4608DD-Series 8" Rivet BusterPart No. 8900000151
CP4611DD-Series 11" Rivet BusterPart No. 8900000152
CP4160D6 in stroke; D handle / inside trigger; Jumbo shankPart No. 9245999917
Overview
Chicago Pneumatic CP 4608D Rivet Buster
With an 8” Stroke the CP 4608D Rivet Buster generates 1080 Blows per minute making it useful for Rivet Cutting and Removal, Concrete Demolition on Parking Ramps, Bridge Decks and other weight restricted demolition jobs. The “D” Handle, Inside Trigger, allows the operator to tease the throttle which provides excellent control of the hammers power output.
Retained Piston system. This reduces the possibility of the Piston ejecting out the Chisel end of the hammer.
At just 30lbs this hammer is great for Horizontal and Overhead work.
Features & Applications
- 8” Stroke, 1080 Blows/Min
- Retained Stepped Piston
- “D” Handle, Inside Trigger
- Uses Jumbo 11X Shank Points and Chisels.
- ½” NPTF Air Inlet
- Air Consumption at 45cfm @90psi
- Part No. 8900 0001 51 Model 4608D
D-Series Part Numbers
CP4608D · Part # 8900000151
CP4611D · Part # 8900000152
CP4160D · Part # 9245999917
Step 1
Choose Your Stroke
Good Choice!
| Select Your Hammer | |||
|---|---|---|---|
| Weight (lb) | 31 | 34 | 25 |
| Cylinder stroke (in) | 8 | 11 | 6 |
| Impact rate (bpm) | 1080 | 720 | 1100 |
| Length (in) | 23 | 26 | 20.5 |
| Air consumption (CFM; test pressure not listed) | 45 | 45 | 44 |
| Air inlet (in) | 1/2 | 1/2 | 1/2 |
| Handle / trigger | D handle / inside trigger | D handle / inside trigger | D handle / inside trigger |
| Chuck / shank | .890 x 1.125 in taper / Jumbo shank | .890 x 1.125 in taper / Jumbo shank | Jumbo shank |
| Air inlet thread | 1/2 in NPTF | 1/2 in NPTF | 1/2 in; thread type not stated in US specification row |
| Part Number | 8900000151 | 8900000152 | 9245999917 |
Step 2
Select Points, Chisels, Etc
The following Points, Chisels, etc. are…
Jumbo 11X Shank
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
Narrow Chisel
For Concrete · Jumbo 11X
10″ under collarPart # JB-10C
12″ under collarPart # JB-12C
18″ under collarPart # JB-18C
Alloy Rivet Cutting Chisel
For Rivet Cutting · Jumbo 11X
10″ under collarPart # JB-10RC
Back-Out Punch
Representative PhotoFor Driving Out Rivets · Jumbo 11X
8″ under collarPart # JB-P03-8
12″ under collarPart # JB-P03-12
Wide Chisel
Requires J-LSS (Lower Split Sleeve)
Part # jb-15wc · 15"
Bushing Tool
J-LSS Split Lower Sleeve Required To Use This Tool
Call for Pricing and AvailabilityStep 3
Wear / Service Parts
Use the parts drawing for CP4608D or call us to confirm replacement wear parts.
Air Hose Options
Hose Only
Call to confirm hose size, fittings and availability.
Hose With Filter
Call to confirm hose size, fittings and availability.
