Bull Point
For Breaking Concrete · Jumbo 11X
10″ under collarPart # JB-10P
12″ under collarPart # JB-12P
18″ under collarPart # JB-18P
Chicago Pneumatic
Chicago Pneumatic CP4608P Rivet Buster
“P” Handle · Outside Trigger
P-Series Part Numbers
Chicago Pneumatic P-Series Rivet Buster
CP4608PP-Series 8" Rivet BusterPart No. 8900000149
CP4611PP-Series 11" Rivet BusterPart No. 8900000150
CP4160P6 in stroke; Open grip / outside trigger; Jumbo shankPart No. 9246020183
Overview
Chicago Pneumatic CP 4608P Rivet Buster
With an 8” Stroke the CP 4608P Rivet Buster generates 1080 Blows per minute making it useful for Rivet Cutting and Removal, Concrete Demolition on Parking Ramps, Bridge Decks and other weight restricted demolition jobs. The “P” Handle, Outside Trigger, allows the operator to tease the throttle which provides excellent control of the hammers power output.
Retained Piston system. This reduces the possibility of the Piston ejecting out the Chisel end of the hammer.
At just 30lbs this hammer is great for Horizontal and Overhead work.
Features & Applications
- 8” Stroke, 1080 Blows/Min
- Retained Stepped Piston
- “P” Handle, Outside Trigger
- Uses Jumbo 11X Shank Points and Chisels.
- ½” NPTF Air Inlet
- Air Consumption at 45cfm @90psi
- Part No. 8900 0001 49 Model 4608P
CP4608P Part Number
Chicago Pneumatic CP4608P · 8″ Stroke · Part No. 8900000149
CP4608P / CP4611P / CP4608D / CP4611D — parts list and exploded diagrams (PDF)
CP4608 / CP4611 documents do not cover CP4160. Match model and serial number before ordering parts.
Step 1
Choose Your Stroke
Good Choice!
| Select Your Hammer | |||
|---|---|---|---|
| Stroke | 6″ | 8″ | 11″ |
| Blows per Minute | 1100 | 1080 | 720 |
| Part Number | 9246020183 | 8900000149 | 8900000150 |
| Weight | 24 lb | 30 lb | 33 lb |
| Overall Length | 20.5″ | 23″ | 26″ |
| Air Consumption | 44 CFM | 45 CFM | 45 CFM |
| Air Inlet | 1/2″ | 1/2″ | 1/2″ |
| Handle / Trigger | Open grip / outside trigger | Open grip / outside trigger | Open grip / outside trigger |
| Chuck / Shank | Jumbo shank | .890 x 1.125 in taper / Jumbo shank | .890 x 1.125 in taper / Jumbo shank |
| Air Inlet Thread | 1/2 in; thread type not stated in US specification row | 1/2 in NPTF | 1/2 in NPTF |
Step 2
Select Points, Chisels, Etc
The following Points, Chisels, etc. are…
Jumbo 11X Shank
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
Narrow Chisel
For Concrete · Jumbo 11X
10″ under collarPart # JB-10C
12″ under collarPart # JB-12C
18″ under collarPart # JB-18C
3″ Wide Blade Chisel
J-LSS Split Lower Sleeve Required To Use This Tool
Jumbo 11X
JB-12C3Part Number
JB-18C3Part Number
Alloy Rivet Cutting Chisel
For Rivet Cutting · Jumbo 11X
10″ under collarPart # JB-10RC
Back-Out Punch
Representative PhotoFor Driving Out Rivets · Jumbo 11X
8″ under collarPart # JB-P03-8
12″ under collarPart # JB-P03-12
Jumbo Pin Driver
Jumbo 11X
JB-49BPDPart Number
Jumbo Barrel Pin Driver
J-LSS Split Lower Sleeve Required To Use This Tool
Jumbo 11X
JB-50BPDPart Number
5″ Wide Asphalt Cutter
J-LSS Split Lower Sleeve Required To Use This Tool
Jumbo 11X · Asphalt Cutting
JB-ACPart Number
Bushing Tool
J-LSS Split Lower Sleeve Required To Use This Tool
Call for Pricing and AvailabilityStep 3
Wear / Service Parts
Select Parts
Part # J-US
Upper Sleeve - Short
Part # J-LS
Lower Sleeve
Part # J-LSS
Split Lower Sleeve
Required For Wide Chisels
Part # J-RB
Poly Bumper
Batch Colors Vary.
Same High Quality.
Part # BRS
Buster Retainer Spring12 Springs per Pack
Air Hose Options
Hose Only
Call to confirm hose size, fittings and availability.
Hose With Filter
Call to confirm hose size, fittings and availability.
