TAMCO

TAMCO RB4181T Pneumatic Rivet Buster

RB4181T: T-handle, jumbo steel; 11-inch stroke as specified in the catalog table.

Do This First!
RB4181T Part Number

TAMCO RB4181T Rivet Buster

RB4181TRB4181T: T-handle, jumbo steel; 11-inch stroke as specified in the catalog table.Part No. RB4181T

Overview

The TAMCO RB4181T is an American-made T-handle jumbo Pneumatic Rivet Buster for demanding demolition. It handles rivet and bolt removal, bridge-deck repair and concrete demolition. Its T-handle distinguishes it from the gooseneck RB4181 in the same manufacturer family.

Features & Applications

  • T-handle configuration.
  • 11-inch stroke configuration.
  • Uses jumbo rivet-buster steel.
  • Domestic manufacture with U.S.-made components.
RB4181T Part Numbers

RB4181T · Part # RB4181T

Step 1

Choose Your Stroke

Compare RB4181T Technical Specifications
Select Your Hammer
Stroke11"
Part NumberRB4181T
Weight34.5 lbs
Length26"
Air Consumption39 CFM
Air Inlet Thread1/2"
SpecificationRB4181T
TypeJumbo
Bore1-3/16" (30.2mm)
Impact Rate720 BPM
Hose Size1/2" (19mm)
Maximum Air Pressure90 PSI
RB4181T: T-handle, jumbo steel; 11-inch stroke as specified in the catalog table.

0 items · 0 piecesAdd a tool or accessory to get started.
Step 2

Select Points, Chisels, Etc

The following Points, Chisels, etc. are…

Jumbo 11X Shank

Jumbo 11X Shank End, with an arrow identifying the round end
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
Bull Point — JB-12P / JB-18P

Bull Point

For Breaking Concrete · Jumbo 11X

10″ under collarPart # JB-10P
12″ under collarPart # JB-12P
18″ under collarPart # JB-18P

Narrow Chisel — JB-12C / JB-18C

Narrow Chisel

For Concrete · Jumbo 11X

10″ under collarPart # JB-10C
12″ under collarPart # JB-12C
18″ under collarPart # JB-18C

Rivet Cutting Chisel — JB-10RC

Alloy Rivet Cutting Chisel

For Rivet Cutting · Jumbo 11X

10″ under collarPart # JB-10RC

Back-Out Punch — Representative Family Photo

Back-Out Punch

Representative Photo

For Driving Out Rivets · Jumbo 11X

8″ under collarPart # JB-P03-8
12″ under collarPart # JB-P03-12

Step 3

Wear / Service Parts

Use the parts drawing for RB4181T or call us to confirm replacement wear parts.

Air Hose Options

Hose Only

Hose Only

Call to confirm hose size, fittings and availability.
Hose With Filter

Hose With Filter

Call to confirm hose size, fittings and availability.
Hose With Filter & Lubricator

Hose With Filter & Lubricator

Call to confirm hose size, fittings and availability.

Contact & Quotes

Tell us which tools or parts you need.

1-800-241-9669 Request A Quote [email protected]

Contact & Quotes

Let’s Find The Right Tool.

Send an inquiry to Mining Auger & Tool Works.

Business & shipping details (optional)

Useful when requesting a shipping estimate. Leave postal code blank if your address does not use one.

700 message characters maximum. Selected items and business/shipping details are included separately.

Up to 3 photos, 10 MB each, 15 MB total. JPG, PNG, GIF, WebP, BMP, TIFF, HEIC or HEIF. Choosing again replaces your selection.

Your details are used to respond to this inquiry.

Prefer to talk? 1-800-241-9669