- Part Number
- 9245999799
- Chuck / shank
- .580 in Hex × Oval Collar
- Cylinder stroke (in)
- 3
- Weight (lb)
- 18
- Length (in)
- 15.25
- Impact rate (BPM)
- 2200
- Air consumption (CFM; test pressure not listed)
- 33.23
- Air inlet
- 3/8 in
- Trigger
- Inside trigger
- Retainer
- Standard oval-collar retainer
- Muffler included
- Yes
- Included whip hose
- 6 ft whip hose and claw coupling
Chicago Pneumatic
Chicago Pneumatic CP4132 Chipping Hammer — Inside Trigger
Do This First!
Parts drawing: 3H/3R/4H/4R; serial PUN246330 onward. Match model and serial number.
Overview
Chicago Pneumatic CP4132 is a four-bolt D-handle chipping hammer with an inside trigger. It is a separate model from CP4130 and CP4133, with 3- and 4-inch stroke options.
Features & Applications
- Trigger: Inside trigger.
- Retainer: Standard oval-collar retainer.
- Compare 4 complete-tool configurations by model and manufacturer part number.
CP4132 Part Numbers
Chicago Pneumatic CP4132 Chipping Hammer
CP 4132 3R · Part No. 9245999800
.680 in Round × Oval Collar; 3 in stroke
CP 4132 3H · Part No. 9245999799
.580 in Hex × Oval Collar; 3 in stroke
CP 4132 4R · Part No. 9245999898
.680 in Round × Oval Collar; 4 in stroke
CP 4132 4H · Part No. 9245999880
.580 in Hex × Oval Collar; 4 in stroke
Match the model, chuck and complete-tool part number. Compare the configurations below when requesting a quote.
Step 1
Select Chuck Size:
You Selected.680″ Round
Match the collar and actual retainer before ordering.Hex or Round
Step 2
Select Stroke:
| Select Your Hammer | ||
|---|---|---|
| Part Number | 9245999799 | 9245999880 |
| Chuck / shank | .580 in Hex × Oval Collar | .580 in Hex × Oval Collar |
| Cylinder stroke (in) | 3 | 4 |
| Weight (lb) | 18 | 19 |
| Length (in) | 15.25 | 17 |
| Impact rate (BPM) | 2200 | 1800 |
| Air consumption (CFM; test pressure not listed) | 33.23 | 33.23 |
| Air inlet | 3/8 in | 3/8 in |
| Trigger | Inside trigger | Inside trigger |
| Retainer | Standard oval-collar retainer | Standard oval-collar retainer |
| Muffler included | Yes | Yes |
| Included whip hose | 6 ft whip hose and claw coupling | 6 ft whip hose and claw coupling |
- Part Number
- 9245999880
- Chuck / shank
- .580 in Hex × Oval Collar
- Cylinder stroke (in)
- 4
- Weight (lb)
- 19
- Length (in)
- 17
- Impact rate (BPM)
- 1800
- Air consumption (CFM; test pressure not listed)
- 33.23
- Air inlet
- 3/8 in
- Trigger
- Inside trigger
- Retainer
- Standard oval-collar retainer
- Muffler included
- Yes
- Included whip hose
- 6 ft whip hose and claw coupling
| Select Your Hammer | ||
|---|---|---|
| Part Number | 9245999800 | 9245999898 |
| Chuck / shank | .680 in Round × Oval Collar | .680 in Round × Oval Collar |
| Cylinder stroke (in) | 3 | 4 |
| Weight (lb) | 18 | 19 |
| Length (in) | 15.25 | 17 |
| Impact rate (BPM) | 2200 | 1800 |
| Air consumption (CFM; test pressure not listed) | 33.23 | 33.23 |
| Air inlet | 3/8 in | 3/8 in |
| Trigger | Inside trigger | Inside trigger |
| Retainer | Standard oval-collar retainer | Standard oval-collar retainer |
| Muffler included | Yes | Yes |
| Included whip hose | 6 ft whip hose and claw coupling | 6 ft whip hose and claw coupling |
- Part Number
- 9245999800
- Chuck / shank
- .680 in Round × Oval Collar
- Cylinder stroke (in)
- 3
- Weight (lb)
- 18
- Length (in)
- 15.25
- Impact rate (BPM)
- 2200
- Air consumption (CFM; test pressure not listed)
- 33.23
- Air inlet
- 3/8 in
- Trigger
- Inside trigger
- Retainer
- Standard oval-collar retainer
- Muffler included
- Yes
- Included whip hose
- 6 ft whip hose and claw coupling
- Part Number
- 9245999898
- Chuck / shank
- .680 in Round × Oval Collar
- Cylinder stroke (in)
- 4
- Weight (lb)
- 19
- Length (in)
- 17
- Impact rate (BPM)
- 1800
- Air consumption (CFM; test pressure not listed)
- 33.23
- Air inlet
- 3/8 in
- Trigger
- Inside trigger
- Retainer
- Standard oval-collar retainer
- Muffler included
- Yes
- Included whip hose
- 6 ft whip hose and claw coupling
You Selected
CP 4132 3RPart # 9245999800.680″ RoundRetainer: Standard oval-collar retainer
Your Quote
0 items · 0 pieces
Add a hammer or accessory to get started.
Step 3
Select Points, Chisels, Etc
The following Points, Chisels, etc. are used with Standard Oval-Collar Retainers.
.680″ Round × Oval Collar
These configurations use the manufacturer-listed standard oval-collar retainer. Match the shank and collar before ordering.
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
Moil Point
.680″ Round × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCRS-12P
18″OCRS-18P
24″OCRS-24P
Request Longer Lengths
Narrow Chisel
.680″ Round × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCRS-12C
18″OCRS-18C
24″OCRS-24C
Request Longer Lengths
2″ Wide Blade Chisel
.680″ Round × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCRS-12C2
18″OCRS-18C2
24″OCRS-24C2
Request Longer Lengths
3″ Wide Blade Chisel
.680″ Round × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCRS-12C3
18″OCRS-18C3
24″OCRS-24C3
Request Longer Lengths
4½″ Clay Spade
.680″ Round × Oval Collar
Standard Lengths: 10″
Length Under CollarQuantity
10″OCRS-CS
All-Steel Bushing Tool
.680″ Round × Oval Collar
Standard Lengths: 8″
Length Under CollarQuantity
8″OCRS-BT
Pin Driver
.680″ Round × Oval Collar
Request the Size You Need.
Tell us your Pin Diameter, Length, and Chuck Configuration.
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
Ready to Order?
Call Now: 1-800-241-9669More Chipping Hammers
View all →
