- Part Number
- 2DA1SA
- Stroke (inches)
- 2
- Chuck/Shank Size (inches)
- .580 Hex
- Retainer Type
- Lock-spring (plain arrow)
- Blows/Min. [/sec.]
- 2200 [37]
- Bore (inches)
- 1-1/8
- Air Consumption @ Load cfm (L/min)
- 28 (793)
- Air Inlet NPT (inch)
- 7/8
- Min Hose Size I.D. (inch)
- 1
- Weight (lbs.)
- 11.8
- Length w/o accy (inches)
- 13.75
Ingersoll Rand
D SeriesChipping Hammer
Overview
This rugged tool features the best power to weight in its class for increased job site productivity. Additionally, this unit features a convenient "D" shaped handle and outside trigger, along with a strong four-bolt backhead for easy serviceability.
Available in 2", 3" and 4" stroke versions.
Features & Applications
- Time tested valve design
- Die cast aluminum handle
- Directional exhaust
- Tease throttle
- Over-molded steel collar
D Series Part Numbers
2DA1SA · 2″ stroke · Part No. 2DA1SA
.580″ Hex
3DA1SA · 3″ stroke · Part No. 3DA1SA
.580″ Hex
4DA1SA · 4″ stroke · Part No. 4DA1SA
.580″ Hex
2DA2SA · 2″ stroke · Part No. 2DA2SA
.680″ Round
3DA2SA · 3″ stroke · Part No. 3DA2SA
.680″ Round
4DA2SA · 4″ stroke · Part No. 4DA2SA
.680″ Round
Confirm the model, chuck, collar and retainer when requesting a quote.
Step 1
Select Chuck Size:
Selected shank: .680″ Round. Match the collar and actual retainer before ordering.
Ready to Order? Call NowStep 2
Select Stroke:
| Select Your Hammer | |||
|---|---|---|---|
| Part Number | 2DA1SA | 3DA1SA | 4DA1SA |
| Stroke (inches) | 2 | 3 | 4 |
| Chuck/Shank Size (inches) | .580 Hex | .580 Hex | .580 Hex |
| Retainer Type | Lock-spring (plain arrow) | Lock-spring (plain arrow) | Lock-spring (plain arrow) |
| Blows/Min. [/sec.] | 2200 [37] | 1900 [32] | 1600 [27] |
| Bore (inches) | 1-1/8 | 1-1/8 | 1-1/8 |
| Air Consumption @ Load cfm (L/min) | 28 (793) | 31 (878) | 34 (963) |
| Air Inlet NPT (inch) | 7/8 | 7/8 | 7/8 |
| Min Hose Size I.D. (inch) | 1 | 1 | 1 |
| Weight (lbs.) | 11.8 | 13 | 14 |
| Length w/o accy (inches) | 13.75 | 17 | 18 |
- Part Number
- 3DA1SA
- Stroke (inches)
- 3
- Chuck/Shank Size (inches)
- .580 Hex
- Retainer Type
- Lock-spring (plain arrow)
- Blows/Min. [/sec.]
- 1900 [32]
- Bore (inches)
- 1-1/8
- Air Consumption @ Load cfm (L/min)
- 31 (878)
- Air Inlet NPT (inch)
- 7/8
- Min Hose Size I.D. (inch)
- 1
- Weight (lbs.)
- 13
- Length w/o accy (inches)
- 17
- Part Number
- 4DA1SA
- Stroke (inches)
- 4
- Chuck/Shank Size (inches)
- .580 Hex
- Retainer Type
- Lock-spring (plain arrow)
- Blows/Min. [/sec.]
- 1600 [27]
- Bore (inches)
- 1-1/8
- Air Consumption @ Load cfm (L/min)
- 34 (963)
- Air Inlet NPT (inch)
- 7/8
- Min Hose Size I.D. (inch)
- 1
- Weight (lbs.)
- 14
- Length w/o accy (inches)
- 18
| Select Your Hammer | |||
|---|---|---|---|
| Part Number | 2DA2SA | 3DA2SA | 4DA2SA |
| Stroke (inches) | 2 | 3 | 4 |
| Chuck/Shank Size (inches) | .680 Rnd | .680 Rnd | .680 Rnd |
| Retainer Type | Lock-spring (plain arrow) | Lock-spring (plain arrow) | Lock-spring (plain arrow) |
| Blows/Min. [/sec.] | 2200 [37] | 1900 [32] | 1600 [27] |
| Bore (inches) | 1-1/8 | 1-1/8 | 1-1/8 |
| Air Consumption @ Load cfm (L/min) | 28 (793) | 31 (878) | 34 (963) |
| Air Inlet NPT (inch) | 7/8 | 7/8 | 7/8 |
| Min Hose Size I.D. (inch) | 1 | 1 | 1 |
| Weight (lbs.) | 11.8 | 13 | 14 |
| Length w/o accy (inches) | 13.75 | 17 | 18 |
- Part Number
- 2DA2SA
- Stroke (inches)
- 2
- Chuck/Shank Size (inches)
- .680 Rnd
- Retainer Type
- Lock-spring (plain arrow)
- Blows/Min. [/sec.]
- 2200 [37]
- Bore (inches)
- 1-1/8
- Air Consumption @ Load cfm (L/min)
- 28 (793)
- Air Inlet NPT (inch)
- 7/8
- Min Hose Size I.D. (inch)
- 1
- Weight (lbs.)
- 11.8
- Length w/o accy (inches)
- 13.75
- Part Number
- 3DA2SA
- Stroke (inches)
- 3
- Chuck/Shank Size (inches)
- .680 Rnd
- Retainer Type
- Lock-spring (plain arrow)
- Blows/Min. [/sec.]
- 1900 [32]
- Bore (inches)
- 1-1/8
- Air Consumption @ Load cfm (L/min)
- 31 (878)
- Air Inlet NPT (inch)
- 7/8
- Min Hose Size I.D. (inch)
- 1
- Weight (lbs.)
- 13
- Length w/o accy (inches)
- 17
- Part Number
- 4DA2SA
- Stroke (inches)
- 4
- Chuck/Shank Size (inches)
- .680 Rnd
- Retainer Type
- Lock-spring (plain arrow)
- Blows/Min. [/sec.]
- 1600 [27]
- Bore (inches)
- 1-1/8
- Air Consumption @ Load cfm (L/min)
- 34 (963)
- Air Inlet NPT (inch)
- 7/8
- Min Hose Size I.D. (inch)
- 1
- Weight (lbs.)
- 14
- Length w/o accy (inches)
- 18
Selected: 4DA2SA · 4DA2SA.680″ RoundLock-spring (plain arrow)
Your Quote
0 items · 0 pieces
Add a hammer or accessory to get started.
Step 3
Select Points, Chisels, Etc
The following Points, Chisels, etc. are for use with Standard Solid Retainers.
The following Points, Chisels, etc. are for use with Compatible Round-Collar Retainers.
.680″ Round × Oval Collar
Match the collar and retainer on your hammer.
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
Moil Point
.680″ Round × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCRS-12P
18″OCRS-18P
24″OCRS-24P
Request Longer Lengths
Narrow Chisel
.680″ Round × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCRS-12C
18″OCRS-18C
24″OCRS-24C
Request Longer Lengths
2″ Wide Blade Chisel
.680″ Round × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCRS-12C2
18″OCRS-18C2
24″OCRS-24C2
Request Longer Lengths
3″ Wide Blade Chisel
.680″ Round × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCRS-12C3
18″OCRS-18C3
24″OCRS-24C3
Request Longer Lengths
4½″ Clay Spade
.680″ Round × Oval Collar
Standard Lengths: 10″
Length Under CollarQuantity
10″OCRS-CS
All-Steel Bushing Tool
.680″ Round × Oval Collar
Standard Lengths: 8″
Length Under CollarQuantity
8″OCRS-BT
Pin Driver
.680″ Round × Oval Collar
Request the Size You Need.
Tell us your Pin Diameter, Length, and Chuck Configuration.
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
