- Part Number
- MCH-3H
- Stroke (inches)
- 3
- Chuck Size (inches)
- .580 Hex
- Bore (inches)
- 1-1/8
- Blows/Min. [/sec.]
- 2280 [38]
- PSI
- 90
- CFM
- 33
- Weight (lbs.)
- 17-3/4
- Length (inches)
- 15-1/4
DISCONTINUED
Looking for a Sullair MCH chipping hammer?
The Sullair MCH Series has been discontinued. Looking for a replacement tool? Check out the Airrex Viper ZP-Series.
Sullair MCH chisels/bits and replacement parts interchange with the corresponding Airrex Viper ZP configuration. Match your shank, collar and stroke when selecting a tool or parts. Not sure which version you have? Call us with your MCH model or part number.
The original MCH specifications, parts drawing and manuals remain below for identifying and maintaining an existing tool.
Airrex Viper ZP →
Sullair
MCH Series Chipping Hammer
Discontinued · Original tool reference
Overview
Four-Bolt Design chipper, hard hitting and tough tool. Great for general work including ramp and bridge decks, foundry and all around light demo. The Sullair MCH series chipping hammer was offered in 2", 3" and 4"strokes with either .680 round or .580 hex bushings.
Two air inlet bushings are furnished: 3/8" NPT and 7/8"-24, internal thread. The bushings provide for versatile hose connections while protecting the handle inlet threads. 8' whip hoses with fittings optional.
Oval collar retainers are included as standard. Optional retainers available are universal ball type and round collar.
Supplied byJackHammers.com
Step 1
Select Chuck Size:
You Selected.580″ Hex
Match the collar and actual retainer before ordering.Step 2
Identify Your Model:
| Historical Models | |
|---|---|
| Part Number | MCH-3H |
| Stroke (inches) | 3 |
| Chuck Size (inches) | .580 Hex |
| Bore (inches) | 1-1/8 |
| Blows/Min. [/sec.] | 2280 [38] |
| PSI | 90 |
| CFM | 33 |
| Weight (lbs.) | 17-3/4 |
| Length (inches) | 15-1/4 |
| Historical Models | |
|---|---|
| Part Number | MCH-3R |
| Stroke (inches) | 3 |
| Chuck Size (inches) | .680 Rnd |
| Bore (inches) | 1-1/8 |
| Blows/Min. [/sec.] | 2280 [38] |
| PSI | 90 |
| CFM | 33 |
| Weight (lbs.) | 17-3/4 |
| Length (inches) | 15-1/4 |
- Part Number
- MCH-3R
- Stroke (inches)
- 3
- Chuck Size (inches)
- .680 Rnd
- Bore (inches)
- 1-1/8
- Blows/Min. [/sec.]
- 2280 [38]
- PSI
- 90
- CFM
- 33
- Weight (lbs.)
- 17-3/4
- Length (inches)
- 15-1/4
You Selected
MCH-3HPart # MCH-3H.580″ HexRetainer: Confirm retainer styleDiscontinued · Reference for replacement / parts assistance
Your Quote
0 items · 0 pieces
Add an accessory or parts inquiry to get started.
Step 3
Select Points, Chisels, Etc
The following Points, Chisels, etc. are used with Standard Solid Retainers.
The following Points, Chisels, etc. are for use with Compatible Round-Collar Retainers.
.580″ Hex × Oval Collar
Match the collar and retainer on your hammer.
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
Moil Point
.580″ Hex × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCHS-12P
18″OCHS-18P
24″OCHS-24P
Request Longer Lengths
Narrow Chisel
.580″ Hex × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCHS-12C
18″OCHS-18C
24″OCHS-24C
Request Longer Lengths
2″ Wide Blade Chisel
.580″ Hex × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCHS-12C2
18″OCHS-18C2
24″OCHS-24C2
Request Longer Lengths
3″ Wide Blade Chisel
.580″ Hex × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCHS-12C3
18″OCHS-18C3
24″OCHS-24C3
Request Longer Lengths
4½″ Clay Spade
.580″ Hex × Oval Collar
Standard Lengths: 10″
Length Under CollarQuantity
10″OCHS-CS
All-Steel Bushing Tool
.580″ Hex × Oval Collar
Standard Lengths: 8″
Length Under CollarQuantity
8″OCHS-BT
Pin Driver
.580″ Hex × Oval Collar
Request the Size You Need.
Tell us your Pin Diameter, Length, and Chuck Configuration.
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
