- Part Number
- 8900000103
- Chuck / shank
- .580 in Hex × Oval Collar
- Cylinder stroke (in)
- 2
- Weight (lb)
- 12
- Length (in)
- 16
- Impact rate (BPM)
- 2600
- Air consumption (CFM; test pressure not listed)
- 20
- Air inlet
- 3/8 in
- Trigger
- Inside trigger
- Retainer
- Standard oval-collar retainer
- Muffler included
- Yes
Chicago Pneumatic
Chicago Pneumatic CP0012 Chipping Hammer — Inside Trigger
Overview
Chicago Pneumatic CP0012 is a compact pneumatic chipping hammer for light chipping and scaling. Choose the .580-inch hex or .680-inch round configuration and match the tool retainer to the accessory.
Features & Applications
- Trigger: Inside trigger.
- Retainer: Standard oval-collar retainer.
- Compare 2 complete-tool configurations by model and manufacturer part number.
CP0012 Part Numbers
Chicago Pneumatic CP0012 Chipping Hammer
CP 0012 2R · Part No. 8900000102
.680 in Round × Oval Collar; 2 in stroke
CP 0012 2H · Part No. 8900000103
.580 in Hex × Oval Collar; 2 in stroke
Match the model, chuck and complete-tool part number. Compare the configurations below when requesting a quote.
Safety & operating manual (PDF)
Parts drawings by model
- 9870050500 CP00122H CHIPPING HAMMER Spare parts list: Handheld pneumatic pick hammers PUN000001 - PUN260000 PN2226531 - PN2231742 PN3210828 -
- 9800051601 CP 001219X50 CHIP HAMMER Spare parts list: Handheld pneumatic pick hammers PUN000001 - PUN260000 PN2225525 - PN2231847 PN3210380 -
- 9870050600 CP 0012 2R CHIP HAMMER Spare parts list: Handheld pneumatic pick hammers PUN000001 - PUN260000 PN2240001 -
Match the model, product number and serial range.
Step 1
Select Chuck Size:
You Selected.580″ Hex
Match the collar and actual retainer before ordering.Hex or Round
Step 2
Select Stroke:
| Select Your Hammer | |
|---|---|
| Part Number | 8900000103 |
| Chuck / shank | .580 in Hex × Oval Collar |
| Cylinder stroke (in) | 2 |
| Weight (lb) | 12 |
| Length (in) | 16 |
| Impact rate (BPM) | 2600 |
| Air consumption (CFM; test pressure not listed) | 20 |
| Air inlet | 3/8 in |
| Trigger | Inside trigger |
| Retainer | Standard oval-collar retainer |
| Muffler included | Yes |
| Select Your Hammer | |
|---|---|
| Part Number | 8900000102 |
| Chuck / shank | .680 in Round × Oval Collar |
| Cylinder stroke (in) | 2 |
| Weight (lb) | 12 |
| Length (in) | 16 |
| Impact rate (BPM) | 2600 |
| Air consumption (CFM; test pressure not listed) | 20 |
| Air inlet | 3/8 in |
| Trigger | Inside trigger |
| Retainer | Standard oval-collar retainer |
| Muffler included | Yes |
- Part Number
- 8900000102
- Chuck / shank
- .680 in Round × Oval Collar
- Cylinder stroke (in)
- 2
- Weight (lb)
- 12
- Length (in)
- 16
- Impact rate (BPM)
- 2600
- Air consumption (CFM; test pressure not listed)
- 20
- Air inlet
- 3/8 in
- Trigger
- Inside trigger
- Retainer
- Standard oval-collar retainer
- Muffler included
- Yes
You Selected
CP 0012 2HPart # 8900000103.580″ HexRetainer: Standard oval-collar retainer
Your Quote
0 items · 0 pieces
Add a hammer or accessory to get started.
Step 3
Select Points, Chisels, Etc
The following Points, Chisels, etc. are used with Standard Oval-Collar Retainers.
.580″ Hex × Oval Collar
These configurations use the manufacturer-listed standard oval-collar retainer. Match the shank and collar before ordering.
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
Moil Point
.580″ Hex × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCHS-12P
18″OCHS-18P
24″OCHS-24P
Request Longer Lengths
Narrow Chisel
.580″ Hex × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCHS-12C
18″OCHS-18C
24″OCHS-24C
Request Longer Lengths
2″ Wide Blade Chisel
.580″ Hex × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCHS-12C2
18″OCHS-18C2
24″OCHS-24C2
Request Longer Lengths
3″ Wide Blade Chisel
.580″ Hex × Oval Collar
Standard Lengths: 12″ / 18″ / 24″
Length Under CollarQuantity
12″OCHS-12C3
18″OCHS-18C3
24″OCHS-24C3
Request Longer Lengths
4½″ Clay Spade
.580″ Hex × Oval Collar
Standard Lengths: 10″
Length Under CollarQuantity
10″OCHS-CS
All-Steel Bushing Tool
.580″ Hex × Oval Collar
Standard Lengths: 8″
Length Under CollarQuantity
8″OCHS-BT
Pin Driver
.580″ Hex × Oval Collar
Request the Size You Need.
Tell us your Pin Diameter, Length, and Chuck Configuration.
Longer Lengths, Additional Blades AvailableCall 1-800-241-9669
